BOLT Coiled Cable Lock Review Video

The usable span of the Bolt Hitch Lock part #BL7023585 that you referenced is a little over 3-1/2 inches. If you check out the picture I attached you'll see all of the dimensions of the lock. This lock is intended for use with 2-1/2 inch hitches…

BOLT does not have a version of their hitch locks that has a straight end. That's interesting that yours is rounding out the hitch pin's hole. There really shouldn't be enough friction between the hitch pin and the hitch pin hole to cause…

I went out to our warehouse and took some useful measurements of the Lippert 1-1/4" Trailer Hitch Receiver part #LC240220 for you. The side brackets on the hitch are 8" long x 4" wide. The distance from the bottom edge of the bracket…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

We can't recommend using more than one hitch extension. The added movement and leverage would put too much stress on the hitch. So if you needed a 12 inch hitch extension instead the Brophy extender part #3371804015 would work great.

Typically the ball mounts that are longer or have large drops/rises have lower capacities than ones that are more standard in dimensions. This is designed to help take care of the capacity reduction question you mentioned since there isn't a hard…

You do not lose any towing capacity when you use the Hidden Hitch Ball Mount #80232 despite it's longer length of 15 inches.

Some are, and some aren't. Most of Curt's ball mounts are made in the USA, each individual product description will identify if they were manufactured in the USA. All the Convert-A-Ball ball mounts we offer are manufactured in the USA.…

One thing to note when using a hitch extender like the etrailer, #e88YR, is that the tongue weight and towing capacity of your trailer hitch will be reduced by 50 percent due to the increased leverage that is placed on your trailer hitch from your…

The Brophy Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 10,000 lbs #BM20 you were looking at has a 1,000lb tongue weight rating and 10,000lb trailer weight rating so you will have no issues using it with your camper that has 500lbs…

It would be best to have the liner sprayed into the bed of your 2017 Ford F-350 before installing B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs Item #BWGNRK1116. This is so there is no chance of the…