Will B and W Rockerball Gooseneck Ball Work with Gen-Y Gooseneck Pin Box Adapter

Question

Question:

Will this work with a GenY gooseneck pinbox that is mounted to a Grand design #16,800 toyhauler? Has anyone that may have tried it given any feedback?

asked by: Bob S

0

Expert Reply:

Yes you can use the Curt Rockerball Gooseneck Hitch Ball # C67DR with the Gen-Y gooseneck pin box adapters. There's not reason it wouldn't work and would give additional cushioning for a smoother ride quality. This ball fits the Curt and B and W gooseneck hitches.

expert reply by: Jameson C

0

Answer 1

If we compare the Curt RockerBall #C67DR to a standard B&W gooseneck hitch ball like part #BWGNXA2000 the RockerBall is 3-3/4" taller. The B&W measures 4" from the center of the hitch pin hole to the base of the…

view full answer...

Answer 2

Yes, the adapter plates are included with the Curt RockerBall Shock Absorbing Gooseneck Hitch Ball #C67DR. They serve as an adapter if you're using the ball with a B&W gooseneck hitch. This ball is also compatible with Curt Double…

view full answer...

Answer 3

Basically the Linxup GPS Tracking Device #300-AT3 needs to have just a power and ground wire ran to it and you'd be set. The red and white wires connect to the 12 volt power source and the black wire gets ran to the vehicle frame to ground…

view full answer...

Answer 4

I spoke to Linxup and they informed me that if the battery is completely drained on the Linxup GPS Tracking Device #300-AT3, that it would take between 4-8 hours to fully charge the battery. Once charged the battery will last up to 3 months as…

view full answer...

Answer 5

The center of the Curt EZr Double Lock Underbed Gooseneck Trailer Hitch #C65HR will fit centered between your wheel wells and 47-7/8" from the rear edge of the bed/tailgate on your 2023 Chevrolet Silverado 2500. The hitch includes a center…

view full answer...

Answer 6

All you need to install a B and W gooseneck ball in the bed of your 2020 Chevy Silverado 3500 with the factory rail kit is the part #BWGNXA2061. This fits the center hole for the gooseneck ball and the safety chain loops fit into the pucks to the…

view full answer...

Answer 7

Yes, we carry the Curt EZr Double Lock Underbed Gooseneck Trailer Hitch #C65HR for your 2023 Chevrolet Silverado 2500. This is custom fit for either the 6-1/2' or 8' beds long bed without the factory in bed tow package. This hitch will come…

view full answer...

Answer 8

The OEM Prep Package on your 2022 GMC Sierra 2500HD will appear as 5 holes in the bed. Four going around in a rectangle with one in the middle (see the included picture). If you have this in your bed, you do have the prep package and actually already…

view full answer...

Answer 9

The Curt EZr Double Lock Gooseneck Hitch part #C65HR is a great option confirmed as a fit for your 2023 GMC Sierra 3500 long bed. It's easy to use, has a 30k capacity, and has a lifetime warranty.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will B and W Rockerball Gooseneck Ball Work with Gen-Y Gooseneck Pin Box Adapter

Product Page this Question was Asked From

Continue Researching