Replacement Low Profile Chrome RV Faucet with 8" Distance for Inlets

Question

Question:

I am in need of a replacement kitchen sink 2 hole 8 inch inlets, chrome, single or double handles and low profile. I have a 2003 29 foot Forest River, Sunseeker Motorhome, my water connections have a tapered grommet or gasket that fit in the inlets of the pipes.

asked by: Doug W

0

Expert Reply:

Thanks for reaching out!

It sounds like you're looking for the Phoenix Faucets RV Kitchen Faucet # PF211326. This is a chrome faucet with 2 inlets that are 8" apart with 1/2" inlets, and a low-profile spout that measures 4-3/4" from the countertop to the to the aerator.

Attached is a review video for you to check out!

expert reply by: Jon G

0

Answer 1

The frustration is in where you are measuring. The measurement is from the top of the shank othe the bottom of the ball platform. This is what will get you the correct ball height because the coupler will sit over the hitch ball. So if you are…

view full answer...

Answer 2

The Draw Tite hitch part #DT45517 that you referenced has a mounting bracket designed for attaching a trailer wiring bracket like the part #18144 to. You would simply need to attach the bracket to the hitch and it would easily store a 4-way.

view full answer...

Answer 3

For your tire size of 205/75-15 the correct Titan tire chain you'd want is the part #TC1545. The #TC1540 wouldn't fit properly as it is designed for a smaller tire diameter.

view full answer...

Answer 4

By mounting hole dimensions I assume you are asking about the distance between them, and that distance is 39 inches for the Draw-Tite Trailer Hitch Receiver #DT45519. That is the same distance between the mounting holes as the similar hitch from…

view full answer...

Answer 5

I did a little research on your 2001 Dodge Ram 3500 and found that it's max towing capacity is listed as 13,900 lbs. I would strongly recommend you check the owners manual of your truck to see what Dodge lists as the capacity for your truck…

view full answer...

Answer 6

The best option I have for you is the Phoenix Faucets RV Kitchen Faucet part #PF221304 for 4" mounting centers or part #PF211326 for 8" mounting centers. The Phoenix Faucets RV Kitchen Faucet unlike most other kitchen faucets has…

view full answer...

Answer 7

The replacement landing gear motor you referenced, Stromberg Carlson #LG-142178, is a widely compatible replacement motor that will work with most major brands of 5th wheel landing gear, including Stromberg Carlson, Lippert, Venture and Atwood.…

view full answer...

Answer 8

Yes, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, #PD4655V is what you are looking for. This upgrades or replaces the converter section for 55-amp Parallax/Magnetek, WFCO, or Parallax RV power centers and works…

view full answer...

Answer 9

The three sizes of electric trailer drum brakes you referenced, 7-, 10- and 12-inch diameters, are intended for different axle weight capacities. Since each size will presumably have a proportionate weight load it has to stop, their wear rates will…

view full answer...

Answer 10

That's all you need! Just drop the Ultra Faucets RV Bar Faucet #277-000069 in place of your original faucet in your 1995 Coleman Fleetwood Pop-Up camper and hand tighten the included mounting nuts against the underside of the counter, and connect…

view full answer...

Answer 11

After doing some research on the 2011 Jeep Wrangler, it appears the bolt pattern of the OEM wheels is 5 on 5 inches. If that is the case, they will not be compatible with the hubs that come with the Timbren Axle-Less Trailer Suspension System,…

view full answer...

Answer 12

Yes the spout on the RV Kitchen Faucet part #277-000014 can be removed for transportation in your pop-up camper. It is a threaded connection.

view full answer...

Replacement Low Profile Chrome RV Faucet with 8" Distance for Inlets

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching