Does B and W Continuum Weight Distribution Work in Cold Weather

Question

Question:

how does all this work in cold temperatures ?

asked by: Scott M

0

Expert Reply:

The B and W Continuum weight distribution systems like the part # BW78FR that you referenced work the same in cold weather as they do in warmer weather.

expert reply by: Jameson C

0

Answer 1

Assuming you were happy with your Fastway, I recommend upgrading to an Equal-i-zer. Equal-i-zer is one of the best brands out there and actually makes the Fastway hitch. This will give you additional sway control on your heavier trailer since it has…

view full answer...

Answer 2

That is definitely a feature which worries me about the B&W Continuum Weight Distribution System #BW78FR. While there is not a specific measurement I can give you as the bars move up and down depending on the load placed on the bars, B&W…

view full answer...

Answer 3

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 4

The B&W Continuum Weight Distribution System part #BW78FR per B&W, does have built-in sway control. That said, all weight distribution systems have some sway control as they provide friction at the connection point which will then in turn…

view full answer...

Answer 5

The entire weight of a weight distribution hitch like the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37061ET should be counted towards total weight. When determining total payload just take the tongue weight of the trailer along with…

view full answer...

Answer 6

Yes, the B&W Continuum Weight Distribution System item #BW78FR will work with the Gen-Y Torsion 2-Ball Mount item #325-GH-1226. The Continuum has a tongue weight range of 600 lbs - 1,600 lbs so you will be limited to 1,500 lbs of tongue weight…

view full answer...

Answer 7

The B&W Continuum Weight Distribution System part #BW78FR for 2" or part #BW28FR for 2.5" is going to be your best option for a toy hauler trailer like a Grand Design Momentum 31G since the tongue weight can vary heavily based on loaded…

view full answer...

Answer 8

The B&W Continuum Weight Distribution System part #BW78FR is not compatible with any other weight distribution system shank. The hole spacing on the shank for the head adjustment is 1-1/2" on center which is more than the 1-1/4"…

view full answer...

Answer 9

I don't think the Shocker Air Equalizer for Weight Distribution Hitch part #SHK68VR would be compatible with the B&W Continuum Weight Distribution System part #BW78FR due to a few reasons, clearance being one but this is also not something…

view full answer...

Answer 10

Because the front axle of the towed vehicle sits over the axle of the tow dolly, very little weight is transferred to the tongue of the tow dolly. I spoke with my contact at Roadmaster and he said the Roadmaster Tow Dolly, #RM-2050-1, was engineered…

view full answer...

Answer 11

Although I am not quite sure what spare tire winch came on your 2007 Coachmen Freelander Class C Motorhome, we do have the universal Lippert Components Spare Tire Winch with Offset Cable #LC159056. Simply click on the hyperlinked part number to order…

view full answer...

Answer 12

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…

view full answer...

Does B and W Continuum Weight Distribution Work in Cold Weather

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching