bing tracking image
Q & A Icon

Parts Needed To Connect Two 20LB Propane Tanks To a Propane Converted Dryer  

Question:

Connectors needed for 20lb grill size tanks 2 of them...To power dryer converted to propane, dryer has what looks like aluminum hose female connector exiting back of dryer, not a vent, its obviously for the gas. This is what I think I need. What am I missing?

0

Expert Reply:

To connect to your two 20lb propane tanks you will need 2 GasGear 90-Degree Propane Hoses # GS47FR. These will connect to a MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS. This regulator will put out up to 500,000BTU's at 11" Water Column. You will need to ensure this meets the requirements for your converted dryer. From the regulator a hose like # 100040-72-MBS is needed to run to the dryer. This particular hose is 6' long with a 3/8" NPT end to connect to the regulator and a 3/8" female flare swivel. If you can let me know what size connection you have on your dryer and a length of hose required I can confirm what parts you will need to run from the regulator to the dryer.

expert reply by:
0
Bud M

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>