Recommended Engine Block Heater For A 2018 Toyota Tacoma

Question

Question:

Hi there, I have a 2018 Tacoma with the 3.5 V6, is this the correct part for this engine? I wasnt able to find that information in the product page. Hoping you guys will get re-stocked on the Kats heaters soon, waiting to ordrr if correct. Thanks,

asked by: Matt

0

Expert Reply:

You're correct, the Kat's Heaters Custom Fit Engine Block Heater # KH11813 is the confirmed fit for your 2018 Toyota Tacoma with a V6 3.5L engine. This block heater will need to be installed in the "FL" position on your engine block.

expert reply by: Kevin C

0

Kat's Block Heater Locations
(click to enlarge)

Answer 1

I confirmed with the manufacturer that Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 will indeed fit your 2021 Toyota Tacoma V6. This installs very simply as you can see in the attached demonstration…

view full answer...

Answer 2

As long as you have found the correct hole in your 2015 Toyota Tacoma the Kat's heater part #KH11813 would be correct for it and should slide right in. Since the hole is somewhat difficult to access you are most likely not angling it in…

view full answer...

Answer 3

I checked with Kat's Heaters and cartridge heater #KH11813 is the correct model for your 2010 Toyota RAV4 with the 6 cylinder motor. It installs at the back left of the engine (left meaning the driver's side). The general instructions are: 1)…

view full answer...

Answer 4

Kat's does recommend coating the cartridge with NSCG silicone grease G-624 before inserting the cartridge heaters like the #KH11813 into the block.

view full answer...

Answer 5

I checked with Kat's and they state that the slot location for installing the Kat's Block heater part #KH11813 on your 2016 Toyota Tundra with a 5.7 liter is in the left rear area of the block. It will be in a similar spot as what you see in…

view full answer...

Answer 6

The Kat's Cartridge Block Heater part #KH11813 does not touch any coolant. It slides into basically a slot on the side of the engine block and basically heats the metal in that slot which in turns warms the nearby coolant. Kat's requires the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Large Yakima OffGrid #Y07139 Cargo Basket uses crossbar clamps that are designed to be universal. They will fit virtually any crossbar shape, including most aftermarket and OEM crossbars. I was not able to find any schematics online that would…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR for your 2023 Toyota Tacoma with the factory tow package. You will be able to connect the wiring using the Redarc Adapter #RED99FR directly to the factory connector. We also have the…

view full answer...

Answer 12

For a made in the USA aluminum ball mount we only have adjustable units like the Flash Secure 2-Ball Mount #DTSTBM6600-2S which includes stainless steel hitch balls as well. The Fulton #F97CR you found as well as the similar Curt #C74WR and Brophy…

view full answer...