What Can SumoSprings Suspension Enhancement do for 2017 Kia Sedona

Question

Question:

My 2017 Kia Sedona is low to the ground and the rear hitch scrapes the ground when going over a dip at driveways and such. Is there a rear spring beef up add-on that will help this?

asked by: Roger

0

Expert Reply:

We have suspension enhancement kits that fit your 2017 Kia Sedona that will help reduce suspension sag when towing a trailer or with extra cargo in the vehicle like with the SumoSprings part # CSS-1125F but if the height you are trying to gain is with no extra weight on the rear suspension you'd need to look into a lift kit which we do not offer.

expert reply by: Jameson C

0

Answer 1

So long as you have a 2-wheel drive model of 2019 Kia Sedona, there are two coil SumoSprings that fit, one for the front springs and one for the rear springs: - Front: Coil SumoSprings #CSS-1125F - Rear: Coil SumoSprings #CSS-1168R

view full answer...

Answer 2

The instructions for the orientation of the Tuson Sway Control part #335TSC-1000 when installed are very specific. The red dot on the label has to be at the trailer's center line and the arrows on the label that say "Mount with this side…

view full answer...

Answer 3

It would be a great idea to use an anti-sway system with your 2018 Volkswagen Atlas and small single axle travel trailer. The smaller single axle trailers are actually more prone to sway than the larger tandem and triple axle trailers due to the lack…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV wins for ease of install and it does a really good job but if you were wanting the best sway control that applies the left and right brake assemblies independently the Tuson…

view full answer...

Answer 11

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 12

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

What Can SumoSprings Suspension Enhancement do for 2017 Kia Sedona

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching