Coil SumoSprings Fit For 2019 Kia Sedona

Question

Question:

Will this kit fit?

asked by: Chris T

0

Expert Reply:

So long as you have a 2-wheel drive model of 2019 Kia Sedona, there are two coil SumoSprings that fit, one for the front springs and one for the rear springs:

- Front: Coil SumoSprings # CSS-1125F

- Rear: Coil SumoSprings # CSS-1168R

expert reply by: Kyle S

0

Answer 1

We have suspension enhancement kits that fit your 2017 Kia Sedona that will help reduce suspension sag when towing a trailer or with extra cargo in the vehicle like with the SumoSprings part #CSS-1125F but if the height you are trying to gain is with…

view full answer...

Answer 2

It would be a great idea to use an anti-sway system with your 2018 Volkswagen Atlas and small single axle travel trailer. The smaller single axle trailers are actually more prone to sway than the larger tandem and triple axle trailers due to the lack…

view full answer...

Answer 3

The instructions for the orientation of the Tuson Sway Control part #335TSC-1000 when installed are very specific. The red dot on the label has to be at the trailer's center line and the arrows on the label that say "Mount with this side…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 12

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

Coil SumoSprings Fit For 2019 Kia Sedona

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching