Recommended Replacement Anti-Rattle Hitch Pin for etrailer Hitch Mounted Cargo Carrier

Question

Question:

Etrailer e98874. Cargo carrier. I need to replace the threaded hitch pin for my cargo carrier. Can you help with this?

asked by: Henry

0

Expert Reply:

Yes, I can help. We do have a replacement threaded hitch pin for your 24x60 etrailer Cargo Carrier item # e98874. It is the Threaded Anti-Rattle Pin Lock item # e99047. This will keep your cargo carrier from moving in the receiver and secures your carrier to the vehicle with the included lock.

I have linked a review video below.

expert reply by: Jerred H

0

Answer 1

When installing the 24x62 etrailer Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs #e98874 you must use either the included anti-rattle threaded hitch pin or the Threaded Anti-Rattle Hitch Pin Lock #e99047. You cannot use a non-threaded…

view full answer...

Answer 2

You'd only need one hitch lock with the etrailer cargo carrier part #e98874 that you referenced. There are two plain pins that allows it to tilt away from the vehicle so you can get to your back hatch or fold up towards your vehicle when not in…

view full answer...

Answer 3

The Curt Cargo Bag #C18211 referenced in your question is indeed a waterproof, soft-sided cargo bag that will do a great job of protecting your valuables from the elements. The heavy-duty, vinyl fabric features welded seams that will help to prevent…

view full answer...

Answer 4

I can confirm that the bolt thread size on the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers #e99047 is M16 x 2. This has a pin diameter of 5/8" with a 2-5/8" span. It is designed for etrailer cargo carriers that fit…

view full answer...

Answer 5

Yes, if you select "keyed alike" from the drop down menu before hitting add to cart on the product page for the anti rattle hitch pin part #e99047 they will all come using the same key number.

view full answer...

Answer 6

The 20x59 Curt Cargo Carrier for 2" Hitches #C18151 that you referenced weighs a total of 58 lbs and has a capacity of 500 lbs. For more info check out the review video link I attached as well.

view full answer...

Answer 7

There is an excellent option for a waterproof cargo bag for. One that will perfectly fit the 60" x 24" cargo carrier is from Curt: - Curt Cargo Bag for Hitch Mounted Cargo Carrier - Waterproof #C18211 The #C18211 is designed for large cargo…

view full answer...

Answer 8

We do have some alternatives as we discontinued carrying the J-Pin when Draw-Tite discontinued the additional hole for the J-pin last year. The Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches #SR25219 can be used…

view full answer...

Answer 9

The 24x60 Curt Cargo Carrier #C18151 is made in China. Curt has cargo bag #C18211 that you can use with this carrier. I have linked videos for both products for you.

view full answer...

Answer 10

There are steel hitch pins for your 2-1/2 inch trailer hitch but all of them have a zinc coating, such as the Gen-Y Hitch Pin and Clip for 2-1/2" and 3" Hitches - 5/8" Diameter x 4" Long #325-GH-099; as you mentioned, for a…

view full answer...

Answer 11

The Tow Ready J-Pin Stabilization Pin and Barrel Lockset 63201 is made for hitch-mount accessories like cargo carriers that do not have a threaded hitch pin hole. Since the 24x62 etrailer Cargo Carrier #e98874 does have a threaded hitch pin hole, you…

view full answer...

Answer 12

These carriers do not wobble any more than a fixed carrier would. Usually the wiggling comes from the shank of the carrier that is inserted in the hitch receiver. There are devices and locks available to prevent this from happening. You could use the…

view full answer...