Can Trailair Pin Box be Used with Pullrite Capture Plate

Question

Question:

Can the trailair be used with a Pull rite capture plate?

asked by: Jay

0

Expert Reply:

Trailair pin boxes like the # LC158778 can be used with Pullrite pin boxes if you use the correct capture plate. We do not currently carry PullRite products but according to my research the correct capture plate is the part 331758, which you can obtain from PullRite directly.

expert reply by: Jameson C

0

Answer 1

While we don't carry Pullrite we have looked into this before and the correct capture plate to use with a Flex Air pin box like the part #LC328330 is the part number 331761.

view full answer...

Answer 2

Equalizers that are different sizes can always be used but depending on how much different the equalizers are in size will tell you how many other suspension components will need to be traded out. Since the Equa-Flex Cushioned Equalizers #LC279687…

view full answer...

Answer 3

To best combat chucking, between a MORryde and Rota-Flex pin box, the best option to replace your Lippert 1621 is the Rota-Flex, with the correct part number being the following: - Trailair Rota-Flex 5th Wheel Pin Box #LC328330 While no pin box is…

view full answer...

Answer 4

The difference between the 1621 and the 1621SHD is weight capacity and how many bolts is required to mount it. The 1621 uses 4 bolts for mounting. The 1621SHD requires all 6 bolts to be used.

view full answer...

Answer 5

I reached out to the manufacturer and got the specs for both the Lippert 1621 5th Wheel Pin Box #LC1191191 and the Trailair Rota-Flex #LC328330 which it is designed to replace. These pin boxes have very similar dimensions, though the the Rota-Flex is…

view full answer...

Answer 6

The Trailair Flex Air 5th Wheel Pin Box #LC328492 that you referenced would not have a shorter or longer distance from the mounting holes to the king pin than the pin box it's designed to replace. This is considered a long pin box which would be…

view full answer...

Answer 7

Per PullRite, measure from the front edge of your Trailair Rota-Flex Pin Box, #LC328330, to the leading edge of the king pin plate. If that measures 5-3/8" you need capture plate 331707. If it is 5" then you need capture plate 331760. This…

view full answer...

Answer 8

You will want to install the Equa-Flex Cushioned Equalizers #LC279687 so that the head of the bolts on the equalizers are facing away from the trailer. The equalizers used to only have the label on one side only which is why the instructions read the…

view full answer...

Answer 9

Trailair Flex Air 5th Wheel Pin Boxes, such as the Lippert #LC328492, are designed to replace the existing pin box on your trailer. The long and short jaw models that you referenced in your question simply refer to the type of pin box that the unit…

view full answer...

Answer 10

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 11

Yes, you are going to need the need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 in order to be able to use the Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw #DM89GV with your Lippert Flex Air Pin Box. These…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Can Trailair Pin Box be Used with Pullrite Capture Plate

Product Page this Question was Asked From

Continue Researching