Adapter Kit Needed To Connect The Rhino Rack Kayak Roof Rack To Vortex Style Crossbars

Question

Question:

is this kayak rack suitable to use with Rhino Rack Vortex Roc25 Flush Black 2 bar Roof Rach?

asked by: Rebecca L

0

Expert Reply:

Since the Rhino-Rack ROC25 Roof Rack # RR56XR has Vortex crossbars you'll need to use the Crossbar Adapters # KC-FK8 to attach the Rhino-Rack Kayak Roof Rack # S510 to them.

expert reply by: Kevin C

0

Answer 1

The Crossbar Adapters for Rhino-Rack J-Style Kayak Carriers S510, S511, and S512 #KC-FK8 contain the tooling needed for 1 set of kayak carriers. There are different components in each kit as it is designed to fit HD crossbars and Aero bars that will…

view full answer...

Answer 2

I do have an option for you but there isn't a way to add an additional paddle holder to the Rhino-Rack 2 Kayak Carrier part #S512-S512X. That said, you could simply use the Rhino-Rack Multipurpose Holders for Roof Rack Crossbars part #RRRMPHU to…

view full answer...

Answer 3

Yes! Make sure to have the bow and stern tie-downs included with the Yakima JayLow #Y04073 properly secured to the front and rear of your vehicle and you're good to go! If you're carrying a second kayak, you will need another set of bow/stern…

view full answer...

Answer 4

Rhino-Rack offers the most reasonably priced roof rack option for your 2019 Cruze. You can assemble a Rhino-Rack Vortex Aero roof rack using the following parts: • 49 Inch Vortex Aero Crossbar in black as part #RRVA126B-2 • 2500 Series Roof Rack…

view full answer...

Answer 5

I have an answer for you. Unfortunately, you need both the Rhino-Rack J-Style Kayak Carrier - Folding - Universal Mount #S512 and the extension #S512X to carry more than 1 kayak. The extension only comes with the platform (not the side arm that…

view full answer...

Answer 6

As long as the combined weight of your two kayaks is less than 165 lbs the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs #S512-S512X it can carry two 13 foot long kayaks.

view full answer...

Answer 7

I recommend going with the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs #S512-S512X. This can hold 1 or 2 kayaks and will take up much less room than using 2 individual kayak carriers, so you will have more spare room on your roof rack for other…

view full answer...

Answer 8

Yes, the Rhino-Rack Multipurpose Holders for Roof Rack Crossbars #RRRMPHU comes with the plate nuts so that you can mount them in the channels of your crossbars.

view full answer...

Answer 9

The Rhino-Rack Crossbar Adapter, part #KC-FK8, is designed to fit the 2 Kayak Carrier, part #S512-S512X, into bars with a C-channel (or T-track). You'd need two sets of these based on how the carrier installs and is for two kayaks.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Adapter Kit Needed To Connect The Rhino Rack Kayak Roof Rack To Vortex Style Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching