How To Hold Extra Paddle When Using Rhino-Rack 2 Kayak Carrier Roof Mount

Question

Question:

Is it possible to order just the paddle tie down lug with the strap for this unit as a separate part? Ive already bought this product but Id like to add two of them to it to hold another paddle.

asked by: PATRICK H

0

Expert Reply:

I do have an option for you but there isn't a way to add an additional paddle holder to the Rhino-Rack 2 Kayak Carrier part # S512-S512X. That said, you could simply use the Rhino-Rack Multipurpose Holders for Roof Rack Crossbars part # RRRMPHU to hold the extra paddle on top of the crossbar.

expert reply by: Conner L

0

Answer 1

The Crossbar Adapters for Rhino-Rack J-Style Kayak Carriers S510, S511, and S512 #KC-FK8 contain the tooling needed for 1 set of kayak carriers. There are different components in each kit as it is designed to fit HD crossbars and Aero bars that…

view full answer...

Answer 2

I like the saddle style roof rack for heavier kayaks like yours. J-Style carriers like #S512-S512X will have much more force on them since the kayaks will want to shift around more if they are not sitting flat on the roof. With these Rhino-Rack…

view full answer...

Answer 3

Yes! Make sure to have the bow and stern tie-downs included with the Yakima JayLow #Y04073 properly secured to the front and rear of your vehicle and you're good to go! If you're carrying a second kayak, you will need another set of…

view full answer...

Answer 4

The crossbars (roof rack) that I recommend for your 2018 Chevy Cruze Hatch back Premier is the 2018 Chevrolet Cruze Roof Rack by Rhino Rack. This consists of: - Rhino-Rack Vortex Aero Crossbars #RRVA126B-2 - Rhino-Rack 2500 Series Legs for Vortex…

view full answer...

Answer 5

As long as the combined weight of your two kayaks is less than 165 lbs the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs #S512-S512X it can carry two 13 foot long kayaks.

view full answer...

Answer 6

Rhino-Rack offers the most reasonably priced roof rack option for your 2019 Cruze. You can assemble a Rhino-Rack Vortex Aero roof rack using the following parts: • 49 Inch Vortex Aero Crossbar in black as part #RRVA126B-2 • 2500 Series Roof Rack…

view full answer...

Answer 7

I recommend going with the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs #S512-S512X. This can hold 1 or 2 kayaks and will take up much less room than using 2 individual kayak carriers, so you will have more spare room on your roof rack for other…

view full answer...

Answer 8

I have an answer for you. Unfortunately, you need both the Rhino-Rack J-Style Kayak Carrier - Folding - Universal Mount #S512 and the extension #S512X to carry more than 1 kayak. The extension only comes with the platform (not the side arm that…

view full answer...

Answer 9

Yes, the Rhino-Rack Multipurpose Holders for Roof Rack Crossbars #RRRMPHU comes with the plate nuts so that you can mount them in the channels of your crossbars.

view full answer...

Answer 10

Since the Rhino-Rack ROC25 Roof Rack #RR56XR has Vortex crossbars you'll need to use the Crossbar Adapters #KC-FK8 to attach the Rhino-Rack Kayak Roof Rack #S510 to them.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

How To Hold Extra Paddle When Using Rhino-Rack 2 Kayak Carrier Roof Mount

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching