Will 55" x 49" Yakima LockNLoad Platform Rack Fit a 2021 Toyota Land Cruiser Heritage Edition

Question

Question:

Does this rack fit a 2021 Land Cruiser. Im looking to replace the Mega Warrior rack that came on my Heritage Edition. Thanks

asked by: Ron

0

Expert Reply:

Yes, the 55" x 49" Yakima LockNLoad Platform Rack for Crossbars # Y05044-39 will fit with the OEM crossbars on your 2021 Toyota Land Cruiser Heritage Edition just fine.

Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 2

Yes the Rhino Rack Universal Pioneer Platform Rack #RR42114BF that you referenced does fit the factory crossbars of your 2019 Toyota RAV4 without the use of any additional adapters and also does not require any drilling.

view full answer...

Answer 3

We can get you set up with everything you need for your 2020 Ford Ranger so you can use the Yakima LockNLoad Platform Rack for Crossbars #Y05044-39. I checked with Yakima for you, and this the 55" long x 49" wide LockNLoad, which is…

view full answer...

Answer 4

The Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR does not have a power cord or adapter to allow it to plug into a USB outlet so you would need to install a 12v outlet, like part #RM-9332, in your vehicle in order to…

view full answer...

Answer 5

I can help you with carrying 2 kayaks but there are no carriers which mount directly to a Pioneer Platform #RR95TB. Instead you will need to mount the Accessory Bars #RR43138B to your platform. These bars are 53" long. This will then allow…

view full answer...

Answer 6

You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part #Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not…

view full answer...

Answer 7

Absolutely! The Yakima OutPost HD Ladder Rack with Tracks #Y87KR is an excellent way to get a roof top tent on a trailer since it has standard-sized crossbars that have standard T-Slots on them which means you have multiple ways to mount various…

view full answer...

Answer 8

I have a perfect solution for you. For your 2017 Toyota Highlander, I recommend looking at the Rhino-Rack RSP Roof Rack #RRRVP37. This system is confirmed to fit the naked roof on your vehicle and will attach using the OEM fixed mounting points on…

view full answer...

Answer 9

The Yakima LockNLoad Platform Roof Tray #Y05044 (K) you're looking at requires that the spacing from the center of the front crossbar to the center of the rear crossbar needs to be 27" to 33" apart. The platform rack will…

view full answer...

Answer 10

The Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 #Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will…

view full answer...

Answer 11

The Yakima HD bars you were looking at has a slot that measures 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. As long as the Eye bolts you get work with this size slot, then then…

view full answer...

Will 55" x 49" Yakima LockNLoad Platform Rack Fit a 2021 Toyota Land Cruiser Heritage Edition

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching