Replacement 2860 Key for Karrite Explorer Cargo Box  

Yes we do! The replacement key that you need for the 2860 locks on your Karrite Voyager is part #THKEYN2860.

The Thule Replacement Key #THKEYN2860 is a fit for your Karrite Explorer but is a bit longer than the original key. In order to make the replacement key work, insert the key in the lock and tap the key in with a rubber mallet in order to fully seat…

Yes the replacement key you need is part #THKEYN2860. Thule now owns the Karrite brand.

To replace the key for your Karrite Explorer Cargo Box you just need the part #THKEYN2860. This will work perfectly with the 2860 lock core on your box.

Thanks for the pictures of your Karrite box's lock setup. Based on that you'd want the part #SR03807 and you'd be set.

You will need part #THKEYN2860. Most SportRack, Thule and Karrite keys can be found by searching THKEYNXXXX, with XXXX replaced by the three or four digit number on the face or side of the lock.

Yes, I do have the replacement key for your Sears Sports 20-sv cargo carrier. The replacement key for lock cylinder 2860 is part #THKEYN2860.

In order to replace the lock cylinder, it must be in the unlocked position. You may be able to have a locksmith remove the broken key in the lock. We do sell replacement lock cylinders If you have a roof rack and accessories that are all keyed the…

You are correct, the Karrite Explorer and Sportrack Explorer are the same cargo box. We do offer a few individual replacement parts for this product like the Replacement Latch #03347 referenced in your question. I recommend the SportRack Replacement…

If you can locate the key number on your existing locks (see photo), we might be able to obtain replacement keys. If the key number shown on your lock begins with the letter N, you can type THKEYNxxxx (with the x's representing the actual key…

For your Sears Sport 20-SV, you can use the Replacement Lock Core and Key for SportRack Explorer Cargo Box #SR03807 for a replacement lock and key. To mount this cargo carrier to your Honda, you're going to need a set of crossbars like #TH711420…

We have the replacement key you'd need with #THKEYN2860 but we don't have this as a lock core. So what you could do is use a change key #853-1251 to remove the core you have and install a new one with #THLOCKN001 and then for a key #THKEYN001…