Does Reese Offer Replacement Spring Bars For Stedi-Flex Weight Distribution Hitches?

Question

Question:

asked by: Patrick C

0

Expert Reply:

I do have some other options for you as Reese does not offer any replacement spring bars for the larger 12,000LB # RP66560 or 14,000LB Steadi-Flex weight distribution hitches. They only offer the Spring Bar # RP58501 for the 400-600lb tongue weights which is not compatible with the larger hitch heads.

We do have the Fastway e2 weight distribution hitches which allow you to use several different spring bars with the same hitch. Here is a list of the different hitches and weight bars.

250-600lbs Tongue Weight Up to 6,000lbs Trailer Weight # FA92-00-0600
400-800lbs Tongue Weight Up to 8,000lbs Trailer Weight # FA92-00-0800
600-1,000lbs Tongue Weight Up to 10,000lbs Trailer Weight # FA92-00-1000
800-1,200lbs Tongue Weight Up to 12,000lbs Trailer Weight # FA92-00-1200

250-600lbs Tongue Weight # FA92-01-0699
400-800lbs Tongue Weight # FA92-01-0899
600-1,000lbs Tongue Weight # FA92-01-1099
800-1,200lbs Tongue Weight # FA92-01-1299

expert reply by: Bud M

0

Answer 1

The Reese Steadi-Flex Weight Distribution System item #RP66560 has a capacity of 600 lbs – 1,200 lbs of tongue weight. I spoke to my rep at Horizon Global and there is not a replacement part available for the individual spring bars in this weight…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

No, you can't. Those hooks are only for recovery or pulling something they're not rated to be flat towed with. You are actually going to have to remove them to install a base plate kit on your 2023 Ford Bronco. Since you have a Blue Ox Alpha…

view full answer...

Answer 4

We have the Blue Ox base plate kit part #BLU23XR that fits your 2023 Ford Bronco Everglade Edition that has the factory heavy duty bumper and winch. I really like the Blue Ox base plates Glen as I think they are the easiest to use and they very high…

view full answer...

Answer 5

The best base plate for your 2023 Ford Bronco is the Roadmaster Direct-Connect Base Plate Kit item #RM92ZR. You will need to use the Demco Tow Bar Adapter Kit item #DM9523032 to connect it to your Demco Dominator item #DM9511008. There is a Demco…

view full answer...

Answer 6

To flat tow your 2023 Ford Bronco Badlands behind your RV with a Blue Ox set up you will need the following parts: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar item #BX7380. This tow bar features non-binding latches and a swivel…

view full answer...

Answer 7

The correct wiring harness for your 2023 Ford Bronco will depend on whether or not you have LEDs. Both harnesses are custom fit and plug in behind your tail lights. LED - Curt T-Connector Vehicle Wiring Harness item #C42WR Non- LED - Curt T-Connector…

view full answer...

Answer 8

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT37GR for your 2023 Ford Bronco. I feel this is the best receiver as it has an extended receiver to give you the clearance needed to carry hitch mounted accessories and clear the rear spare…

view full answer...

Answer 9

You're right, there are two 4-way trailer wiring harnesses that fit your 2024 Ford Bronco, so the correct fit for yours will depend on if your Bronco has LED taillights or not. So you will need one of the following: - WITHOUT LED Taillights: Curt…

view full answer...

Answer 10

Since your 2022 Bronco has LED tail lights, you will need the Tekonsha OEM Replacement Vehicle Wiring Harness item #TK55VR. This will add a 7-way connector to your Bronco and also provide you with a brake controller adapter that will work with…

view full answer...

Answer 11

Yes, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK55VR is specifically designed to be used on your 2021 Ford Bronco Wildtrack that did not come with a factory tow package. This kit will allow you to install the…

view full answer...

Answer 12

Yes. The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW #EQ37100ET requires the sway control brackets be positioned between 27-32 inches back from center of coupler, so with your 29 inch measurement it…

view full answer...

Does Reese Offer Replacement Spring Bars For Stedi-Flex Weight Distribution Hitches?

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching