Can Bimini Top Be Installed at Front of 2020 Bentley Elite 22

Question

Question:

I have a 2020 Bentley Elite 22, and Im interested in mounting this on the bow of the boat to act as a second Bimini top to the factory one that already is in place! I have not seen anywhere on here that precludes this time of use! I believe I could just mount it backwards and have the radar Position be on the front rail raised enough to board the boat with the boot on the top! If Im errant in my thinking please let me know! thanks in advance for your feedback!

asked by: David S

1

Helpful Expert Reply:

As long as you have enough room to mount the SureShade Power Bimini Top for Pontoon Boat # SS87TR and have it work properly I see no reason why this would be an issue.

The mounting bracket requires holes to be drilled into your frame 16" apart on center (be sure to check for wires inside your frame) and then the orientation of the framing matters as well (see attached photo).

I'm linking the instructions of this top for you to check out.

expert reply by: Jon G

1

Mounting Guidelines for SureShade Power Bimini Top for Pontoon Boat
(click to enlarge)

Answer 1

Check out the link I provided that is instructions for installing an aftermarket brake controller in a truck just like yours. You will need to run the brake output wire to the trailer connector you plan on using when you tow.

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 5

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 6

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 7

To install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 in your Freightliner S2RV chassis the wiring is behind the kick panel in the drivers compartment. There is not a connector on the wires, they are simply terminated with tape. You will…

view full answer...

Answer 8

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 9

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 10

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Can Bimini Top Be Installed at Front of 2020 Bentley Elite 22

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching