Does Malone Paddle Carrier MPG121 Fit Yakima Round Crossbars

Question

Question:

Does this fit on a Yakima round bar?

asked by: Doug G

0

Expert Reply:

Yes, the Malone Paddle Carrier for Roof Rack Crossbars # MPG121 that you referenced does fit the Yakima round crossbars.

expert reply by: Jameson C

0

Answer 1

Either the Curt Hitch #13147 or the Draw-Tite Hitch #75650 would work very well for you. The main difference between the two is the tube design like you noticed. There is not an advantage to having a round tube over a square tube hitch or vice versa.…

view full answer...

Answer 2

As far as the mounting style on the Thule JawGrip #TH73NV, it comes with bolts that go into top crossbar channels. This is because it is a channel-mount style. It is important to note that if you have square crossbars, you need the additional adapter…

view full answer...

Answer 3

I have just the product line for you. Take a look at Quick Fist Long Arm Clamps #QF40010. These durable rubber straps will hold items from 0.5" to 4.5" in diameter. We also have items designed for holding paddles such as paddle holder…

view full answer...

Answer 4

The threaded portion of the SeaFlo #SE53FR is 1.3 inches and the overall diameter of the flange is 2.4 inches.

view full answer...

Answer 5

Yes, the bars on the Malone MicroSport Trailer with J-Style Carriers for 4 Kayaks - 800 lbs, part #MPG462G2, has square crossbars, so your Malone Paddle Carrier for Roof Rack Crossbars - Clamp On - 4 Paddles, part #MPG121, will easily install to the…

view full answer...

Answer 6

The Malone MicroSport trailers like you have use the bearing kit part #BK1-100 that you mentioned which comes with the correct seal size. Or for a replacement hub that comes pre-greased part #34822545BX. Then for a heavy duty and waterproof grease…

view full answer...

Answer 7

The correct updated front and rear hinge/lid support for a Yakima Skybox 18 is the Replacement Lid Support for Yakima Cargo Boxes part #8880683 for the front and then the Replacement Lid Support for Yakima Cargo Boxes part #8880684 for the rear. I…

view full answer...

Answer 8

I spoke with my contact at Yakima and they told me that per the photo you sent you have a cargo box that can uses the SKS(Same Key System). You just need the Control Key, part #Y8007835 to remove the lock core on the open side of your cargo box. One…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...