How Do The RV Cabinet Door Struts Install?

Question

Question:

How do the recommended mounting the eyelet end?

asked by: Paul

0

Expert Reply:

The RV Cabinet Door Struts # 37270555 that you mentioned is designed to install to a ball socket like # 3691858.

However, these cabinet door struts do include the necessary ball socket needed for installation.

expert reply by: Bryce D

0

Answer 1

There is no specified weight limit for the RV cabinet hinge #37270555. Generally they will work with any size cabinet door found in an RV or camper. We have seen them used on doors wider than 2', and you can use 2 struts per door for larger doors…

view full answer...

Answer 2

You will definitely want to go with the Road Armor Shock Absorbing Equalizer Kit #LC696740 over the MORryde as the Road Armor has more travel and will provide a smoother ride. Then, in regards to shackle straps I'm not sure what you mean by which…

view full answer...

Answer 3

As far as ride quality goes it would be challenging to feel a difference between the Road Armor and MORryde Cushioned Equalizers like part #MR27ZR. I like how heavy duty the MORryde equalizers are made though so since ride quality would be about same…

view full answer...

Answer 4

The Furrion cameras, like what comes in the part #FOS43TASF that replaced the part you referenced, are only compatible with their specific monitors. If you are looking for a camera system that allows you to use your smartphone as the monitor then I…

view full answer...

Answer 5

Thank you for that information with the photo, and I reached out to Lippert to find the pin box you have, and they told me that you had a Lippert 1621HD pin box. We do have the MORryde cushioned pin box that will work as a replacement with the…

view full answer...

Answer 6

The correct MORryde Cushioned 5th Wheel Pin Box for a 2021 Grand Design Reflection 367BHS is part #MR84VR. The Lippert 1621 and 1621HD are interchangeable.

view full answer...

Answer 7

Yes, the RV Cabinet Door Struts #37270555 that you referenced can be used on vertical cabinets that are only 6 inches tall. It would just be a matter of placing where to mount the strut for it to make sense. You might have to mount on back wall of…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

How Do The RV Cabinet Door Struts Install?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching