Replacement Spring Bars for a Pro Series RB2 Weight Distribution System
Question:
I need the correct spring bars for #58333 I am pulling a 3500lb trailer.
asked by: Robert N
Expert Reply:
For the Pro Series RB2 system and its head, # 58333, there are different spring bars you could use. You need to go by the total tongue weight of the set up. This is the tongue weight of the trailer when loaded and ready to tow plus the weight of anything loaded behind the rear axle of the vehicle.
For a 3500 pound trailer and a tongue weight of 10 to 15 percent you are looking at 350 to 525 pounds. You can use Item # RP58114 for 1 round bar with the cam end. These are rated for a tongue weights between 400 and 800 pounds and should work fine if your trailer is a little under. Weight could be added to the rear of the vehicle behind the rear axle or near the front of the trailer to increase the tongue weight if necessary. If you also need chains and hardware for your new bars I would recommend Reese's Replacement Weight Distribution Chain Kit Item # 3216.
Products Referenced in This Question
Reese Replacement Weight Distribution Chain Kit
- Accessories and Parts
- Weight Distribution Hitch
- Chains
- Reese
more information >
Replacement Round Spring Bar for Reese Weight Distribution System - 800 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 750 lbs TW
- Round Bar
- Reese
more information >
Continue Researching
- Shop: Replacement Head for Fastway e2 Weight Distribution Systems - Round Bar
- Q&A: 1,200 lb Tongue Weight Spring Bars for Pro Series RB2 Weight Distribution Head
- Q&A: Replacement Reese Weight Distribution Hitch Head Compatible with Round Spring Bar # RP58114
- Q&A: Can Second Friction Sway Control be Used on Trailer Setup and Will It Help
- Q&A: Can Dual-Cam Sway Control be Added to an Older Reese Weight Distribution System
- Search Results: ps58442
- Shop: Replacement Round Spring Bar for Reese Weight Distribution System - 800 lbs TW
- Shop: Replacement Head for Reese Weight Distribution System - Round Bar
- Shop: Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 1,000 lbs TW
- Search Results: 49570
- Search Results: reese pro series 15k
- Search Results: pro series weight distribution
- Shop: Replacement Spring Bar for Curt MV Weight Distribution System - 1,000 lbs TW
- Shop: Replacement Head for Curt MV Weight Distribution Systems
- Q&A: Spring Recommendation for Pro Series Weight Distribution Head
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 90160
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Brake Controller
- Search Results: fender
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement