Solution for Ladder Rack and Tonneau Cover for 2020 Toyota Tacoma With Stock Tonneau Cover

Question

Question:

Hi - I have a 2020 Tacoma - 4 door TRD - 5 foot bed - with stock manufacturer tonneau cover which covers the rails when its folded down. Will Item # A49ZR work with this setup? If not, can you recommend a product that will? Thanks.

asked by: Pete

0

Expert Reply:

The Adarac Aluminum Series Custom Truck Bed Ladder Rack # A49ZR only works with inside-the-rail tonneau covers. Since your current tonnea cover covers the rails it is not compatible with this or any other ladder rack. If you want to use both a ladder rack and tonneau cover, your only option would be to replace your current tonneau cover.

For a simple roll-up cover you could use the Access TonnoSport # A22050269. For a more premium option that will also work with this ladder rack you could use the Pace Edwards Switchblade Retractable Hard Tonneau Cover # 311-SWTA10A38. Because of the contours on the # A49ZR you would not be able to use a folding cover.

If you want a folding cover you could use the # A76ZR for the ladder rack. This has vertical posts so it would not interfere with the panels on a folding tonneau cover like the # LE59VR.

expert reply by: Robin H

0

Answer 1

The Adarac Pro Series Custom Truck Bed Ladder Rack #A66ZR you were looking at, which also comes in Black #A76ZR, is the ladder rack you will want to go with. This is confirmed to fit your 2018 Toyota Tacoma 5' bed and it is compatible with…

view full answer...

Answer 2

Thule TracRac offers some high quality options for your truck. They're lightweight, yet carry a pretty high weight capacity that would be great for most folks. If an 800 lb capacity would be sufficient for you, the Thule TracRac TracONE ladder…

view full answer...

Answer 3

The ladder rack that's compatible with the BAKFlip tonneau cover on your 2018 Toyota Tacoma I recommend the Adarac Pro Series Ladder Rack, part #A76ZR for a 5' bed or part #A26ZR for a 6' bed. I really like the Pro Series rack because…

view full answer...

Answer 4

When fitting a ladder rack to a truck that has a tonneau cover you need to go with one that install through the top of the bed rails and not wrapping around them like you noted. So for your 2018 Toyota Tacoma 5 foot bed you'd want the Adarac Pro…

view full answer...

Answer 5

Yes! For mounting the Malone TradeSport Ladder Rack #MAL55VR to your Toyota Tacoma, you need to use the included Toyota Tacoma fit kit hardware. This kit is designed specifically for your truck. I went ahead and attached a screenshot of this fit kit…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Shannon, thanks for reaching out! Sounds like you're looking for the Thule Xsporter Pro #TH500XTB-THXK3 for your 2008 Toyota Tacoma with the Deck Rail System. This is adjustable up and down as well as along the Deck Rail System so you get the…

view full answer...

Answer 12

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...