Will the Feedback Sports RAKK XL Bike Floor Stand Work for an 80 lb. Bike w/ 4" Tires

Question

Question:

It looks like you said the Feedback stand will work on a garage floor for a 70# bike and that there is no weight limit stated for the rack. So am I right in thinking the rack would support my 80# bike with 4 inch tires?

asked by: Ray N

1

Helpful Expert Reply:

Yes, the Feedback Sports RAKK XL Bike Floor Stand # 301-17345 will work for your 80 lb. bike with 4" tires. The Feedback Sports RAKK XL Bike Floor Stand # 301-17345 will work with tires up to 5" and does not have a weight limit listed since the rack is not supporting all of the bikes weight.

expert reply by: Scott S

1

Answer 1

The Feedback Sports RAKK XL Bike Floor Stand - Black #301-17345 doesn't have a weight capacity so it will hold an electric E-Bike up inside a travel trailer. This is designed for a standard storage situation like in a garage where the floor is…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, the Torflex Lift Kit #K71-707-02 will indeed fit your 2020 Forest River Rockwood Mini Lite 2109S with Dexter #10 3,000 lb axles. This kit is made specifically for the #10 Torflex axles rated between 2.3K-4K, so it will be exactly what you need…

view full answer...

Answer 6

When installing the Torflex Lift Kit #K71-707-02 for the #10 Dexter axles on your 2022 Forest River Rockwood Mini Lite travel trailer you will want to follow the manufacturer instructions for raising your entire trailer off the ground. This is…

view full answer...

Answer 7

The mounting plate for the Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR has the following dimensions. I have included an image to show the measuring points. The holes are spread 5-1/2" wide with the vertical holes separated 1" on the…

view full answer...

Answer 8

You referenced the Camco Fold-Away RV Grab Handle #CAM42176 but I am not sure that is what you have in your picture as the mounting brackets aren't supposed to have those indentions. There is actually a spring on the Camco part you mentioned that…

view full answer...

Answer 9

The Lend-a-Hand Extra Large Folding Grab Handle for RVs - Black with Black Foam Grip - Aluminum #AM-533 have brackets that have three holes in each. I went out to our warehouse to measure for you and the holes from top bracket to bottom bracket are…

view full answer...

Answer 10

There is no weight rating for the Mounting Bracket, part #TV-0002. It is designed to replace the bracket for the Trailer Valet Trailer Jack, part #STC-V211. The Trailer valet has a weight capacity of 500 lbs. You may be able to install a different…

view full answer...

Will the Feedback Sports RAKK XL Bike Floor Stand Work for an 80 lb. Bike w/ 4" Tires

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching