Dimensions Of Replacement Mounting Bracket For Trailer Valet
Question:
Do you have a drawing showing dimensions for this bracket? Is the pipe a standard size that a typical 3000LB capacity trailer jack would fit on? What is the weight rating for this bracket? Thanks
asked by: Russ
Helpful Expert Reply:
There is no weight rating for the Mounting Bracket, part # TV-0002. It is designed to replace the bracket for the Trailer Valet Trailer Jack, part # STC-V211. The Trailer valet has a weight capacity of 500 lbs.
You may be able to install a different trailer jack in the bracket but since they do not test the bracket with any other manufacturer items, I cannot give you a weight capacity for the bracket or a guarantee it will work.
I pulled one of the # TV-0002 from our warehouse and took some measurements for you. The bolt holes on the mounting pipe are 5/8 inch diameter. The inside diameter of the pipe mount is 2-3/8 inches and the outside diameter of the pipe is 2-3/4 inches, and the pipe mount is 2-3/8 inches deep. The overall height of the bracket is 8 inches, and the width of the bracket overall is 7-1/2 inches. The mounting bracket is 2-5/8 inches deep. I have attached a photo of the bracket with the dimensions you asked about noted.
This bracket can be mounted on trailer frames up to 2-3/4 inches wide x 6 inches tall.
Products Referenced in This Question
Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Trailer Dolly
- Manual Dolly
- 5000 lbs Capacity
- 15 Inch Tall
- Steel
- Silver
- Trailer Valet
more information >
Product Page this Question was Asked From
Replacement Mounting Bracket for Trailer Valet Swivel Jack and Trailer Mover
- Accessories and Parts
- Trailer Dolly
- Trailer Jack
- Trailer Dolly Parts
- Mounting Brackets
- Trailer Valet
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Mounting Bracket for Trailer Valet Swivel Jack and Trailer Mover
- Video: Trailer Valet Trailer Jack TV-0002 Review
- Shop: Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option - Side Mount - Sidewind - 5K
- Shop: Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 15-1/2" Travel - 3K
- Shop: CE Smith I-Beam Clamp for Boat Trailers - Galvanized Steel - Qty 1
- Search Results: trailer valet
- Video: Trailer Valet 5X Swivel Jack and Trailer Mover Review
- Shop: Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Shop: Square Pipe Mount Swivel Jack w Footplate - Drop Leg - Weld On - Topwind - 28-7/8" Lift - 7K
- Shop: Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option - Side Mount - Sidewind - 2K
- Q&A: What is Diameter of Trailer Valet Mounting Bracket Post
- Search Results: boat trailer side posts
- Shop: Roof Rack
- Shop: Trailer Hitch
- Video: Review of Trimax Locks Wheel Chocks - Trailer Wheel Chock And Lock - TMX75FR
- Video: Trimax Trailer Wheel Chock and Lock Review
- Search Results: tire covers
- Shop: Wheel Cover
- Video: Trailer Valet JXS Trailer Jack with Footplate Review
- Video: etrailer Trailer Jack TJP-IP916 Review
- Video: etrailer Stabilizer Jacks Review
- Q&A: How To Manually Operate Jammed Electric Trailer Tongue Jack
- Q&A: Husky Brute 4500 Electric Jack Manual Crank And Switch Not Working
- Q&A: Troubleshooting Husky Brute Trailer Jack Not Working
- Q&A: Troubleshooting Ultra-Fab 4500 Electric Tongue Jack That Blinks and Does Not Operate
- Search Results: sewer couplers and nipples
- Q&A: Bolt on Boat Trailer Jack for Frames Up to 6" Tall
- Q&A: Will The Trimax Trailer Wheel Chock Fit On ST205/75 R14 Tires?
- Search Results: titan model 20 actuator
- Search Results: camper shell rack