Center Cap and Hub Covers For 15" Vesper Steel Wheels With 5 on 4-1/2" Bolt Pattern

Question

Question:

do you carry center caps for vesper wheeles 15in. 5x4.5

asked by: Bruce S

0

Expert Reply:

We do have the Lionshead Trailer Wheel Center Cap # LHCS102-SI60C that will fit the 15" 5 on 4.5" Vesper Steel Modular Trailer Wheel # MX34FR with 3.19" pilot hole.

We also have hub covers in Black # PXQT545BHS and Chrome # QT545C if you want to cover the lug nuts as well for a cleaner appearance.

expert reply by: Bud M

0

Answer 1

It really comes down to the thickness of the door on your 1967 Airstream. From my research it looks like the 66-68 Airstreams had a thicker door which was over 2-1/4" thick. If you have the thicker door the only option would be to use one of…

view full answer...

Answer 2

For a 15-inch trailer wheel or wheel-with-tire with the 5-on-4-1/2-inch bolt pattern we have many options shown on the linked page, including the wheel you referenced, part #MX34FR. These 15-inch trailer wheels include 15 x 5 and 15 x 6-inch sizes.…

view full answer...

Answer 3

Hey Jim! The Taskmaster and Westlake tires, like the Taskmaster ST235/75R15 Off-Road #TA45RR and Westlake ST235/75R15 Off-Road #WST54FR you were looking at, are made in China. A lot of people tend to shy away from trailer tires made in China but…

view full answer...

Answer 4

view full answer...

Answer 5

I went and pulled a Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 from our warehouse to determine the weight capacities and found that on the sidewall it was stamped Load Range D with a 2,150 lb capacity at…

view full answer...

Answer 6

For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since…

view full answer...

Answer 7

You can potentially switch from ST205/75R14 tires and wheels to ST205/75R15 tires and wheels but you first need to make sure that there is enough clearance all around the existing tires for the larger size. The 14s that you have now are abut 26.3…

view full answer...

Answer 8

If your trailer has 7 wires running all the way back to the brakes, then yes, you can tap into the existing wiring. Each of your new brakes will have two wires for the brake magnet. One wire is for 12 volt power to the brake magnets and the other…

view full answer...

Answer 9

Yes, you can upgrade your current leaf springs with the higher rated 4,500 lb part #e27SR and you'll be fine. The suspension might be a little stiffer but you wouldn't have to worry about it going flat like what you have now.

view full answer...

Center Cap and Hub Covers For 15" Vesper Steel Wheels With 5 on 4-1/2" Bolt Pattern

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching