Air Compressor Kit For Air Bag Helper Springs On a 2021 Ford F-150 That Can Be Used To Fill Tires

Question

Question:

Hi, I was wondering if yall could help me find a product? I recently bought a 2021 F150 3.5l ecoboost with max tow package. It also has 33 tires and looks like it has a front end lift. Anyways, I will be using the truck to tow several different types of loads from 5k upto its max of 12.5k and will be towing them off-road and on beach sand. Im looking into getting air bags and a compressor for off-road but what Im wondering is if theres a system like the wireless air lift 5000 that will let me inflate airbags as needed but ALSO inflate/deflate all 4 tires as needed? Preferably,I would like to be able to do this from inside the truck cab but I dont mind getting out and using hoses, if necessary but ideally Id like everything mounting and permanent on the truck. But not mounted in the bed. Any suggestions. Thanks for the help

asked by: Wayne W

0

Expert Reply:

I recommend installing the Air Lift LoadLifter 5000 Ultimate Plus Air Springs # AL67PD on your 2021 Ford F-150 3.5l EcoBoost. These have an internal jounce bumper that will help to reduce bouncing while you are driving both on and off-road.

For controlling the air pressure in the air springs as well as being able to inflate your tires I recommend using the Air Lift WirelessAIR Compressor System # AL74000EZ. This has a dual outlet allowing you to connect the air lines for the air springs with a Tee # AL21838 The 2nd outlet can be used to run air line to a tank. We a have 1-Gallon # F9125, 2-Gallon # F9126 and 5-Gallon # F9191 option you can select from depending on what you will be able to fit under the bed of your F-150. The Connector # F3046-1 install on the tank and accept the 1-1/4" air line from the compressor. Then you will be able to install a Quick Connect Coupler # BDW42023 on the other end which will allow you to use the Inflator # TM74SR to fill your tires manually.

expert reply by: Bud M

0

Answer 1

The adapter fittings you need to hook up an air compressor to air bags that use stainless steel lines do not come with the air compressor but rather the air bags. The Air Lift WirelessONE Compressor System for Air Helper Springs part #AL25980 will…

view full answer...

Answer 2

The Air Lift LoadLifter 5000 Air Helper Springs #AL57297 is compatible with your 2WD 2006 Dodge Ram 2500 Mega Cab 5.9 L Diesel. Air Lift does a great job at test fitting their air bag kits and they have confirmed that this will fit your…

view full answer...

Answer 3

The installation instructions for the Air Lift WirelessONE Compressor System #AL25980, linked for your reference, do note on page 6 that the compressor should be mounted in a "dry, protected area". Direct water splashes or other…

view full answer...

Answer 4

I would run a wire to the fuse box under your hood and then find a circuit that only sees voltage when the key is on like the radio circuit. Tapping into a circuit there will be better because it will prevent the accessory the circuit powers from…

view full answer...

Answer 5

When adding a compressor system like the WirelessONE #AL25980 to your Air Lift LoadLIfter 5000 that feature the braided stainless steel lines you will need to use the included AN to PTC adapter fitting. This fitting will then connect to the nylon…

view full answer...

Answer 6

I spoke with my contact at Air Lift regarding installing their compressors in the engine bay compartment. He stated that they do not recommend doing this with any of their compressors as the heat from the engine will likely cause damage to the unit…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Air Compressor Kit For Air Bag Helper Springs On a 2021 Ford F-150 That Can Be Used To Fill Tires

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching