Trailer Hitch Receiver Availability For a 2008 Hyundai Sonata Towing a U-Haul Trailer
Question:
Need a Class 2 Tow Package with a 2 inch ball for a 2008 Hyundai Sonata to pull a 4x6 inch covered U-Haul trailer,also purchasing a wheelchair lift...
asked by: Wayman N
Expert Reply:
Currently the only receivers available for your 2008 Hyundai Sonata are class I like the Curt Trailer Hitch Receiver # C11325. This is mostly due to your Sonata having a maximum towing capability of 200lbs tongue weight and 2,000lbs or total trailer weight. Be sure to check your owners manual for your maximum towing capacity. Curt recommends using the Ball Mount # C45521 in the rise position. You will be able to use either a 1-7/8" Ball # C40001 or 2" Ball # C40018 with the U-Haul trailer. A Pin & Clip # F-4 is needed to hold the ball mount in the receiver.
The T-One Vehicle Wiring Harness # 118433 will give you a 4-way flat connector for the lights on the U-Haul trailer.
Depending on the weight of your wheelchair you will likely need Trailer # K2MMT4X6 to haul it as your Sonata has the maximum tongue weight of 200lbs. Most of your wheelchair lifts will require a 2" receiver which is not available for your Sonata.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Detail K2 Mighty Multi Utility Trailer - 6' Long - 1,295 lbs
- Trailers
- Utility Trailers
- Platform
- 1295 lbs
- TIlt Bed Frame
- Cargo
- Wheeled Equipment
- 4W x 6L Foot
- Powder Coated Steel
- Detail K2
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Adapting a Kuat NV 2.0 Bike Rack for 1-1/4 Inch Hitches to Fit a 2 Inch Hitch
- Q&A: Upgrading Trailer Tires and Wheels For Highway use on Harbor Freight 4x8 Folding Trailer
- Q&A: Troubleshooting Featured Disabled Code With Lippert Ground Control 3.0
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Q&A: Explanation of Why Class II Hitch Cargo Carrier Wont Fit Class I Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Is There Replacement Mounting Hardware for the Fairing on Curt Roof Mounted Cargo Basket # 18115
- Q&A: Best Hitch for Cargo Carrier and Bike Rack for 2020 Honda Odyssey
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: My Trailer Hitch Doesn't Fit
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Best Bike Racks for Electric Bikes
- Article: How to Choose a Hitch-Mounted Bike Rack