Trailer Wiring Harness For A 2022 Hyundai Kona

Question

Question:

Hi everyone. I have a 2022 Hyundai Kona. I bought a universal tow harness, installed it and found out, the turn signals on my trailer wont work, except brake lights and regular lights. I checked voltage on the vehicle harness and found out the turn signals are LEDs and use just a little bit of voltage, I believe that could be the problem. I saw you guys sell a harness, part number 59236 Curt Powered Tail Light Converter for 2-Wire, 3-Wire or PWM Systems - 4-Way Flat Harness Replaces 59200 Item # C59236. Will that item fix the problem? Thank you in advance.

asked by: Jesus J

1

Helpful Expert Reply:

We have the perfect wiring harness for your 2022 Hyundai Kona.

The Curt Powered Tail Light Converter # C59236 is confirmed to fit. This harness will work with the LED turn signals voltage use. The harness will connect directly to your battery to avoid overloading your vehicle's electrical system. This harness will connect directly to your vehicle's wiring with the included quick-splice connectors. The wires are color-coded which eases the installation. You will need to determine you have separate or combine wiring. This will change how the harness will get wired.

I attached a review video link below.

expert reply by: Noah E

1

Answer 1

Both the Curt #C56175 and #C59236 will add a 4-way trailer connector to your 2006 Volkswagen Golf. The main difference between these products is that the #C59236 is a powered tail light converter, which means it gets wired to your vehicle's…

view full answer...

Answer 2

Hey Parrish, There was a design change in the Draw-Tite Max-Frame Trailer Hitch Receiver #76227 so it unfortunately only comes with one hitch pin hole now and there unfortunately are no other compatible hitches available with a second hole for a…

view full answer...

Answer 3

It looks like Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2 Item #8-201-5UC3 could be the right replacement for you. You can check the bearing numbers if you still have the bearings. If they are 25580 for the inner and LM67048 then…

view full answer...

Answer 4

I confirmed with my contact at Dexter Axle that the grease zerk used in their EZ Lube spindles like #TRU74FR is a standard 1/4-inch pipe thread fitting that you can replace with an item like #Gzerk. Your local hardware store may have one too. You…

view full answer...

Answer 5

Yes, the 12 volt accessory circuit of your trailer wiring would be able to keep a 10 amp breakaway kit battery topped off like the part #3802311. Usually the 12 volt accessory circuit of a 7-way is protected with either a 30 amp or 40 amp fuse.

view full answer...

Answer 6

For your Lance 855s Camper with standard tracks I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 #RRRLT600 and then crossbars like the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black -…

view full answer...

Answer 7

Yes, you can install a fifth wheel hitch on a 2021 GMC Sierra 2500 with Carbon Pro Bed. For this, I recommend the Demco Hijacker Autoslide 5th Wheel Trailer Hitch part #DM8550034 with Demco Hijacker Premier Series Above-Bed Base Rails and Custom…

view full answer...

Answer 8

Did you have a 4-pin connector that had 5 wires or was it a 5-pin connector? There is a big difference since you normally see a 5-pin connector on a boat trailer with the 5th pin used for an electric reverse lockout solenoid on a brake actuating…

view full answer...

Trailer Wiring Harness For A 2022 Hyundai Kona

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching