How To Use Detail K2 Storm II Elite Snowplow On 2002 Ford F-150 2WD

Question

Question:

Will the Complete package include everything we need to install this on a bare 2002 2-Wheel Drive F150?

asked by: Joseph D

1

Helpful Expert Reply:

In order to use the Detail K2 Storm II Elite Snowplow part # K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part # K281511.

expert reply by: Conner L

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hello Steve. I do have a good solution for you, but I cannot recommend using the Malone Adapter #MPG544. Since it is rated for towing only 4,000 lbs, your 8,000 lb towed vehicle would be double the max towing capacity. You are right about there being…

view full answer...

Answer 4

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 5

The usable pin length for both pins that come with the Fastway Hitch Lock and Adjustment Pin Lock Set #FA86-00-4200 measures 3-5/8" (see attached). If this is too short for your 2023 Toyota Tundra please let me know what length you're…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

I checked with Curt and I can confirm that the Curt Front Mount Trailer Hitch item #C22NR does fit the 2022 Chevrolet Silverado 1500 LT with the diesel engine. The only picture we have is from the installation instructions and I have attached it…

view full answer...

Answer 8

Yes, it does fit the diesel model. The best front hitch for your 2023 GMC Sierra 1500 diesel is the Curt Front Trailer Hitch item #C22NR. This hitch is custom fit and bolts to your Sierra with included hardware.

view full answer...

Answer 9

Yes, it does. The Curt Front Mounted Hitch item #C22NR does fit a 2022 GMC Sierra 1500. This hitch is custom fit and bolts to your truck with included hardware. This hitch has a 2" receiver, a 500 lbs vertical load limit, and a 5,000 lbs towing…

view full answer...

Answer 10

The Draw Tite front hitch part #DT44HR is a fit for all models of the 2020 GMC Sierra 1500 including the Elevation models.

view full answer...

Answer 11

The Curt Front Mount Trailer Hitch Receiver #C22NR fits all modes of the 2023 GMC Sierra 1500. This includes your Denali with the 3.0L Duramax Turbo-Diesel engine.

view full answer...

Answer 12

Yes, the Curt Front Mount Trailer Hitch Receiver part #C22NR is the same as 31092 and it's a fit for 2023 Chevrolet Silverado 1500. This will be a great addition to your truck without any drilling required. It can be used for anything from…

view full answer...

How To Use Detail K2 Storm II Elite Snowplow On 2002 Ford F-150 2WD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching