How to Determine if the Oil Cap Kit # RG04-270 Would fit Hubs
Question:
want to make sure it will fit this
asked by: Marilyn
1
Helpful Expert Reply:
The Oil Cap Kit # RG04-270 that you referenced is designed to fit the following axles:
Dexter 9K (after 10/1989), 10K GD (2-piece drum), and 10K to 15K Dexter axles. You will need to confirm that you have one of those axles to know if the # RG04-270 would work for you.
There should be a plaque or sticker on the frame of your trailer near the coupler that should list what axles you have. There might also be the same on the axles themselves for you to determine which one.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 3.984 Inch O.D.
- Redline
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Diameter Holes are Required For The LED Trailer Mini Clearance Lights MCL10AKB & MCL11RKB?
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Brake Assembly Recommendation for 2005 Wells Cargo Cycle Wagon Trailer with Dexter 3500 lb Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Q&A: What Replacement Disc Brakes do I Need for My TDE46890 System?
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Torque Rating for Spindle Nut on Trailer Hubs
- Q&A: Is there a Replacement for Dexter Nev-R-Lube Hub 008-386-80
- Article: Trailer Maintenance Schedule
- Article: Best Bike Racks for Electric Bikes