How to Determine if Replacement RV Air Conditioner Cover Will Fit 641715.301 Dometic AC

Question

Question:

Will this shroud fit a 641715.301 Dometic roof top AC.

asked by: Peter W

0

Expert Reply:

The Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners # AT3308046006 measures 40-1/2" long x 29" wide x 7" tall (see attached). You'll need to compare that to your 641715.301 Dometic roof top AC to ensure that it fits as I don't have the exact specs of your AC unit.

I've also added a review video for you to check out.

expert reply by: Jon G

0

Atwood AT3308046006 Measurements
(click to enlarge)

Answer 1

We do indeed have a shroud that will fit your Dometic Duo-Therm 600315.331 air conditioner: - Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners #AT3308046006 The #AT3308046006 is designed specifically to fit the 600315…

view full answer...

Answer 2

The Atwood #AT3308046006 cover that you selected will likely work just fine. I contacted the manufacturer and they did not have your model 600315.321 so I can't spec out the exact one. There may be another sticker on your unit ending in .331…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 11

Can you email me the pictures? Its going to be one of the following two though. Either part #MA00-325001 or #MA8335A5261. Whichever looks like what you have would be correct.

view full answer...

Answer 12

Correct, the Replacement RV Air Conditioner Cover for MaxxAir TuffMaxx Units #MA00-325001 you're looking at will work with your Coleman AC. This shroud measures 41-5/8" long x 29-3/8" wide x 12-3/4" tall, so it'll have plenty…

view full answer...

How to Determine if Replacement RV Air Conditioner Cover Will Fit 641715.301 Dometic AC

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching