Is only a Single Voyager Adapter Needed on 2022 GMC Sierra with Furrion Vision S System

Question

Question:

I have 22 GMC trying to connect to my 4 camera system on my rv. I have already purchased the furrion 7 way power adapter…cameras work but getting connection error code on my dash. I called etrailer to see about returning the adapter and the lady said I needed another adapter VGR64VR in combination to fix the problem. Attempting to install VGR64VR this morning I watch the installation video on etrailer.com and it only shows how to hook up the rear view camera. I have the Furrion 4 camera system. Is that installation going to fix the issue for all 4 cameras? Or do I install it differently?

asked by: Scott B

0

Expert Reply:

With just the 12V PWM Filter for RV Backup Camera Systems - Hardwire # VGR64VR installed on your setup all of the cameras of the 4 camera Furrion Vision S system part # FR98NR will work with your 2022 GMC Sierra.

expert reply by: Jameson C

0

Answer 1

The issue that you're facing with your Furrion camera System is caused by the PWM GM has switched to with their 7-way wiring and can be solved in two ways: 1. By using the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation…

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Is only a Single Voyager Adapter Needed on 2022 GMC Sierra with Furrion Vision S System

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching