Recommended 2 Inch Trailer Hitch for a 2013 Cadillac SRX

Question

Question:

Do have 2 inch hitch kit for for a 2013 Cadillac SRX?

asked by: Danny W

0

Expert Reply:

Yes, we do have a hitch for your 2013 Cadillac SRX. It is the etrailer Trailer Hitch item # e55AR. This hitch is custom fit and bolts to your Cadillac with included hardware.

I really like this hitch because it installs right below your rear bumper and has a matte black finish. Both of these functions really make the 2" x 2" receiver blend in well for a subtle look. This also helps you with ground clearance so you won't have to worry about bottoming out when going up or down step inclines.

To tow with this hitch you will need a wiring harness item # 118259 if you have the factory tow package or item # C59236 if you do not.

I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop.

expert reply by: Jerred H

0

Answer 1

Just a single difference exists between the Curt and etrailer trailer hitches for your 2016 Cadillac SRX, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which you…

view full answer...

Answer 2

In order to secure a 4-way trailer connector like the Curt T-Connector Vehicle Wiring Harness part #56096 on a 2016 Cadillac SRX with a Curt Trailer Hitch Receiver like part #C13002 or part #C12070 you can use the No-Drill Mount for Electrical…

view full answer...

Answer 3

The method we use to determine the correct line to install a transmission cooler on is pretty simple. You want to install the cooler on the return line. To determine which line is the return line you will want to start with your truck totally…

view full answer...

Answer 4

When towing a relatively high amount for the capacity of a vehicle it's a great idea to have an aftermarket transmission cooler. For a 3,500 lb trailer towed by your 2015 Cadillac SRX with a hitch like the part #C13002 I would recommend…

view full answer...

Answer 5

The towing capacity of a 2016 Cadillac SRX FWD 3.6L is 2,500 lbs for models without the factory tow package or 3,500 lbs for models with the factory tow package. Adding the towing components aftermarket won't increase towing capacity in their…

view full answer...

Answer 6

The 2015 through 2017 Chevy Traverse models have a towing capacity of 2,000 lbs with the V6 3.6L. If you were to purchase the models with the factory tow package (all except the LS base model), the capacity increases to 5200 lbs according to the…

view full answer...

Answer 7

Yes, you will be able to reinstall the bumper cover for an OEM look on your 2021 Cadillac XT4 after installing the Curt Trailer Hitch Receiver #C39FR. I have attached an installation video for you to see the finished product. If you don't already…

view full answer...

Answer 8

I did some looking around, but I was unable to find anything we carry to accomplish a quick release of this panel. That being said, this does not mean there is nothing available. We do have an alternate option, however. A hitch cover like the…

view full answer...

Answer 9

Curt Trailer Hitch Receiver #C13002 will install on the 2011 Cadillac SRX such that the end of the receiver tube will extend out past the location of the OEM knock-out panel. This is why that panel must be notched. If you refer to the linked image…

view full answer...