Demco Hydraulic Brake Line Kit # DM5426 for Use on 1993 Calkins Trailer in a Marine Environment
Question:
I am replacing seals, drum brakes DEMCO 42028/42029 on a marine trailer. The replacement brake I am looking to purchase are galvanized as I launch my boat in salt water. I am also replacing the brake lines. I am looking for more corrosion resistance than the steel brake lines kits you sell. Are these coated?
asked by: Steven M
Expert Reply:
I have confirmed with my contacts at Demco, that the Demco Hydraulic Brake Line Kit # DM5426 is coated with a galvanized finish. With the additional galvanized finish, it provides the additional corrosion resistance that you are looking for compared to steel brake lines.
This brake line kit is also 3/16 of an inch in diameter, and is designed for use on single axle trailers. This kit includes lines and fittings needed to run brake fluid from your surge brake actuator to the trailer brakes.
I have included a link to the parts referenced above, and a couple of short demonstration videos for your reference.
Products Referenced in This Question
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 12" - Right Hand - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 7000 lbs
- Brake Assembly
- Free Backing
- 12 x 2 Inch Drum
- Demco
more information >
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 12" - Left Hand - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 7000 lbs
- Brake Assembly
- Free Backing
- 12 x 2 Inch Drum
- Demco
more information >
Product Page this Question was Asked From
Demco Hydraulic Brake Line Kit for Single Axle Trailers - Drum Brakes
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Hydraulic Drum Brakes
- Brake Lines
- Steel Brake Line
- Brake Line Kits
- Single Axle
- Demco
more information >
Continue Researching
- Q&A: Does Dexter Breakaway kit part # T2385500 Come with Cable that Attaches to Handle
- Q&A: Most Common Trailer Brake Line Fitting Size
- Q&A: Recommended Replacement Reverse Lockout Solenoid for a Demco DA70 Actuator
- Q&A: Availability of a Master Cylinder Rebuild Kit for a Toledo Trailer Brake Actuator
- Q&A: Is There a Way to Replace Cracked Screen on Lippert Smart Jack
- Q&A: Available Brake Line Kits and Individual Steel Brake Line Parts
- Q&A: Is Titan Replacement Solenoid Valve Compatible with 3/16" Brake Line
- Article: Trailer Couplers
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Determining Trailer Tongue Weight
- Article: What is Boondocking
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer