Option to Replace Ventline Roof Vent With Wall Switch

Question

Question:

I have a power lift fan that looks like your ventline model. I have a wall switch that has two switches on it. One for openining the lid and one to turn on the fan. Would like a more robust fan that I could use this wall switch with. Dont really need a remote since its for the bathroom. Thanks for your help.

asked by: Bob C

0

Expert Reply:

I'm not aware of any cross-compatible vents with the Ventline wall switch; the wiring schematics will be different, so if you wanted to replace yours with a more robust option, you could do so with one that has a wall-mounted remote. While technically a remote, you can use it just like a switch as it does come with cradle that you mount to the wall.

If you're okay going this route, a better roof vent with a 12 volt fan that is more powerful is the MaxxFan Deluxe. This is a 10-speed fan so you can set the power exactly to your liking, and is available in either white or back:

- White: MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-07000K

- Black: MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-07500K

Both will fit roofs 1-1/8" to 6-1/2" thick and if you need a caulk gun and sealant you can use Caulk Gun # PTW54295 and TremPro 644 Silicone Sealant # 0160297.

expert reply by: Kyle S

0

Answer 1

For your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote #MA00-07500K on your 2013 Jayco Eagle Fifth Wheel, the correct replacement roof flange assembly is the Replacement Roof Flange Assembly #MA49FR.

view full answer...

Answer 2

You will not need any extra parts to wire either the Dometic FanTastic Roof Vent #FV803350 or #FV807350 in place of your current fan. The MaxxFan Deluxe Roof Vent #MA00-07000K would be the route I would go thanks to its additional features. No matter…

view full answer...

Answer 3

Hi Eric; the Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger #C52044 will work for your triple axle Kaufmann trailer. This is designed for 1 to 3 axle trailers with electric brakes so triple axle isn't a problem. As long as…

view full answer...

Answer 4

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer vinyl…

view full answer...

Answer 5

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 6

There are going to be two options for best caulk or sealant for your RV and it is going to depend on where your are using it. If you are on your roof you will want a self leveling sealant like the Alpha Systems 1021 Self-Leveling Sealant for RVs -…

view full answer...

Answer 7

If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…

view full answer...

Answer 8

The weld bracket on the top of the Ark Drop Down Corner RV Stabilizer Jack Kit #ARK34FR is 4.6063" long and the surface that would make contact is 1.8307" wide. The overall width is 2.8543" on the top. I have attached a dimensional…

view full answer...

Answer 9

The base will have to change as there's no way to attach the B and W Companion hitches that use the gooseneck post to the OEM pucks of your new Chevy truck. The correct base you'd need is the part #BWRVB3710 but another option you might…

view full answer...