Does the Aero Crossbar T-Slot Mounting Hardware for Inno Fit a Shadow Cargo Box and Yakima HD Bars

Question

Question:

Will this work with the IN-N-OUT Shadow and the Yakima HD Bars?

asked by: Allen

0

Expert Reply:

Yes, the Aero Crossbar T-Slot Mounting Hardware for Inno Cargo Boxes and Platforms # INBRP12 will work with your Inno Shadow box and the T-slot on the Yakima HD bars.

expert reply by: Scott S

0

Answer 1

I attached a picture that shows the T-slot dimensions that the Inno T-slot Adapter Kit #INBRP12 is designed to fit. We've found that most roof rack manufacturers make the dimensions of their top channels to be close enough that they allow…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 4

The Inno Shadow 16 #INBRA1210BK has 13 cu ft of storage while the Inno Wedge 660 comes in Gloss Black #INBRM660BK or Gloss White #INBRM660WH and has 11 cu ft of storage. It may has less storage space but the Wedge 660 is actually more of a premium…

view full answer...

Answer 5

Hi Alec, The Inno Kayak Roof Rack w/ Tie-Downs #INA452 needs a 28" minimum spread so that the saddles sit at the right spot for the kayak and support the weight properly. This is probably just a general guide from Inno though because the length…

view full answer...

Answer 6

You would need to take one measurement to determine if the hitch adapter part #e93YR would fit your 2010 Honda Civic. You would need to measure from the center of your hitch pin hole out to the outer edge of your bumper. If that dimension is less…

view full answer...

Answer 7

The Inno Shadow 16 Rooftop Cargo Box #INBRA1210BK is a great box. This version of the Inno Shadow Box has a Quick Mount system which does a great job of securing the box to your roof rack. So as is, your Inno Shadow 16 will fit your crossbars with no…

view full answer...

Answer 8

There is a solution that involves adding perpendicular bars to your Yakima OverHaul HD. However, it will not be by attaching Yakima HD Bars to your Yakima OverHaul HD. The HD bars are not designed to mount perpendicular to your existing roof racks…

view full answer...

Answer 9

You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up…

view full answer...

Answer 10

There are not any set numbers for how much of a dip you may see in your miles per gallon with the Thule Pulse Large Rooftop Cargo Box #TH615 on your 2021 Toyota 4Runner. There have been some test done and most indicate that you will see around a 15%…

view full answer...

Answer 11

It wouldn't significantly affect the height of the box. The lower profile of the #INBRP12 would be more to do with the fact that claws wouldn't be grabbing around the bars and instead it would look like the box attaches to the bars just by…

view full answer...

Answer 12

I do have some great cargo box options for a 2015 Jeep Grand Cherokee but cargo boxes are not waterproof as this requires special testing and ratings cargo box manufactures simply don't design around. In order for a company to state a product is…

view full answer...

Does the Aero Crossbar T-Slot Mounting Hardware for Inno Fit a Shadow Cargo Box and Yakima HD Bars

Product Page this Question was Asked From

Continue Researching