Can I Mount A Yakima HD Bar Perpendicular To The HD Bars Of My Existing Yakima Rack

Question

Question:

Can I install Yakima HD Bars perpendicular to the HD Bars I already jave on my truck?

asked by: Virgilio

0

Expert Reply:

There is a solution that involves adding perpendicular bars to your Yakima OverHaul HD. However, it will not be by attaching Yakima HD Bars to your Yakima OverHaul HD. The HD bars are not designed to mount perpendicular to your existing roof racks crossbars. The SideBar Rails for Yakima OverHaul HD and Outpost HD Truck Bed Racks - Short Bed - 100 lbs - Qty 2, part # Y01153, will have the same effect. These side rails even have t-channels for other channel mounted accessories.

I have included a product description and a video review of a Yakima OverHaul with SideBars attached to a 2020 Jeep Gladiator below.

expert reply by: Mark Smith

0

Answer 1

Thanks for the photo, and so long as you use the Yakima SkyLine Towers, you can switch the rack to your 2016 Lexus GX 460 with the appropriate landing pads that fit it, the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR.

view full answer...

Answer 2

To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item #Y01156 BaseLine Towers for…

view full answer...

Answer 3

Yes the Yakima WindShield Fairing for Roof Racks #Y05017 that you referenced will fit around the larger diameter Yakima HD bars you mentioned.

view full answer...

Answer 4

It might be possible to use the Long Bed Yakima SideBar Side Rails #Y01154 for the OverHaul Rack #Y01151-57 on your Ford F-150 Raptor with the short bed but it's going to depend on how much space you have between the uprights when…

view full answer...

Answer 5

The Yakima SideBar Rails cannot be cut as the assembly does in fact involve one bar sliding into the other like you mentioned and it would not be structurally sound, but there is a short bed version of these rails, which is the SideBar Rails for…

view full answer...

Answer 6

You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up…

view full answer...

Answer 7

The SideBar Rails #Y01153 would be included in the capacity of the Overhaul HD Ladder Rack #Y01152-5855 (this comes with the adapters included) so you would assume it's just the same as if you loaded something on top of the crossbars. The…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Can I Mount A Yakima HD Bar Perpendicular To The HD Bars Of My Existing Yakima Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching