What Crossbar Length Rhino Rack Roof Rack for 2019 Jeep Wrangler Unlimited with Sky Roof

Question

Question:

Hello, I am planning on using Rhino Rack Roof Rack Legs - Gutter Mount - 8-1/4 tall on my 2019 4 door Jeep Wrangler Rubicon with Sky One Touch Roof. What length cross bar to do you recommend? 50 or 59 inch? I am planning on attaching a cargo basket to the bars. Any advice you provide will be appreciated. Thanks,

asked by: Jim C

0

Expert Reply:

For your 2019 Jeep Wrangler Unlimited Rhino Rack recommends their 59 inch long crossbar roof rack with the part numbers # RRVA150B-2, # RL210S2, and # RRVA-FK1-2. This would be the way to go over a shorter bar setup that most likely wouldn't be long enough. This would work great with a cargo basket like the Thule Canyon XT part # TH859XT.

expert reply by: Jameson C

0

Answer 1

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof…

view full answer...

Answer 2

All of the roof racks we offer for your 2022 Jeep Wrangler Unlimited with the sky top roof have a 100 lb dynamic (when in use on highway) roof capacity including the Yakima Round Bar Rack #Y00409 and #Y00101 as well as the Rhino Rack roof rack part…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

We noticed when we installed the etrailer Trailer Hitch Receiver #e98856 on a similar 2022 Jeep Wrangler it had 8" from the center of the hitch pin to the rear edge of the stock spare tire. This would likely not allow you to fold up the…

view full answer...

Answer 6

The LED notification strip that typically attaches to the rearview mirror of the vehicle being flat towed will not always light up when the vehicle brakes are applied. It would have to be connected to the tow vehicle. I attached a diagram for how it…

view full answer...

Answer 7

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 8

In order to add a 7 way connector on you 2020 Jeep Wrangler JL you'll need to start by adding a 4 way trailer connector like the Tekonsha #118786, which gives you the connections needed to install a 7 way connector. Once you've installed the…

view full answer...

Answer 9

What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.

view full answer...

Answer 10

The Hollwood Racks #HLY64FR is an excellent choice for most users with an RV towed Jeep Wrangler. If your jeep has a standard size spare on the back, like the one in the picture I have attached, then you can see that you will have plenty of room with…

view full answer...

Answer 11

A smaller hitch extender like the Curt part #C45791 would work to give you the additional clearance for your Hollywood Racks RV Rider part #HLY64FR that you need.

view full answer...

Answer 12

You're correct, you won't need the motorhome end of things since your motorhome has the Spartan Safe Haul system. You'll need the following parts which is the Air Force One Kit minus the parts that would typically go on the motorhome: •…

view full answer...