How to Determine if the Lippert Solid Stance RV Step Support Kit Will Work with Hickory Entry Steps

Question

Question:

I have a Jayco 5th wheel with Hickory by HMS Entry steps. Will the Lippert solid stance LC 96BJ work on these? Thanks

asked by: Bobby Y

0

Expert Reply:

The Lippert Solid Stance RV Step Support Kit # LC96BJ is designed to work with steel RV steps with at least 5" ground clearance. The Hickory steps are a steel construction. So as long as you have at least 5" of ground clearance, then yes the Lippert Solid Stance RV Step Support Kit # LC96BJ will work with your steps.

expert reply by: Scott S

0

Answer 1

The Lippert Solid Stance RV Step Support Kit #LC96BJ will fit your triple Hickory steps on your Keystone Outback 250RS that you referenced. This requires a minimum of 5 inches of ground clearance to fit which yours having 6 inches means it would…

view full answer...

Answer 2

With the interior stairs being in the way like they are your only option is to go with an undermounted step like the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8003 I recommended before. To make fold-down steps work in your 2019…

view full answer...

Answer 3

The hinge plate of the MORryde Flip Tread RV Steps #MR42UR is 4-1/4" in depth. If you have an obstruction such as an interior step that is protruding into the door opening, you'll need to measure 4.5" from inside of the door…

view full answer...

Answer 4

If there's a conflict in the instructions provided by the RV manufacturer and what's stated by the manufacturer of a sub-assembly such as the #LC1387882 Lippert 1621 pin box, you'll want to go with the advice from the manufacturer of the…

view full answer...

Answer 5

Pin box bolt torque is based on the size of the bolts. 1/2 inch Bolts GR5 90 ft-lbs 5/8 inch Bolts GR5 150 ft-lbs 3/4 inch Bolts GR5 275 ft-lbs

view full answer...

Answer 6

When a 5th wheel hitch's height is raised to increase clearance between the bottom of the trailer overhang and the tops of the truck's bed rails this can put the trailer into a nose-high orientation. Since trailers tow best when they are…

view full answer...

Answer 7

Your 2012 Forest River XLR I believe has a 1621 pin box. You can confirm this by looking at the stickers on your current pin box or measuring the bolts as shown in the attached article. The Reese Goose Box Fifth-Wheel-to-Gooseneck Adapter #RP85FR is…

view full answer...

Answer 8

Mainly the difference is the Lippert 1116 is considered a medium length pin box and the 1621 is considered a long one. It's not by much but the 1621 stick out about 3 inches further.

view full answer...

Answer 9

The minimum bed rail to trailer overhang clearance we recommend is 6 inches, so if your setup is 9 inches currently and you need the nose of the trailer to come down still you could lower the pin box up to 3 inches to help level it out. You would…

view full answer...

Answer 10

I went to our warehouse and measured the holes you mentioned you wanted the measurement for on the Lippert 1621 5th Wheel Pin Box, part #LC1387882. The holes measure 3/8 inch diameter. I have also attached a drawing of this pin box with the…

view full answer...

Answer 11

Correct, for the Lippert 1621SHD 5th Wheel Pin Box, #LC1387882 and other pin boxes, reference is for the bolt diameter not wrench size.

view full answer...

Answer 12

Pin box bolt torque is based on the size of the threaded portion of the bolts and not the wrench size. 1/2 inch Bolts GR5 90 ft-lbs 5/8 inch Bolts GR5 150 ft-lbs 3/4 inch Bolts GR5 275 ft-lbs

view full answer...

How to Determine if the Lippert Solid Stance RV Step Support Kit Will Work with Hickory Entry Steps

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching