Will Correct Track Trailer Alignment and Lift Kit Work with Existing Lippert Correct Track
Question:
Hi Im looking to lift my 2014 Heartland C30 Toy hauler a couple of inches and came across this Correct Track RR23QX. The RV already has an older Correct Track System installed which uses a Hexagon adjustment cam for spreading or compressing the springs but doesnt lift the trailer, the older Correct Track system also uses a channeled hanger to hold the adjustment cam in place and has 2 7/8inch width inside the channel, so my question is does this RR23QX Correct Track lift system work with the older Correct Track system?
asked by: Shawn R
Expert Reply:
The Correct Track Trailer Alignment and Lift Kit part # RR23QX will replace the Lippert Correct Track if present, they will not work together. That said, you won't see much of a change in ride height from switching as they both provide a lift of around 2". The only option we offer for more lift is an axle flip kit but this is only an option if the springs are under the axle, if so then the Dexter Trailer Springs Over-Under Conversion Kit part # K71-384-00 or part # K71-385-00 would work.
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Wiring Diagrams
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Double Eye Leaf Springs For Tandem Axle Trailer With 10,500LB Rating and 24" Length on Spring
- Q&A: Does MORryde ALLTREK 4000 Cushioned Equalizer Sit Taller to Offset for Additiona Suspension Movement
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Q&A: What Leaf Spring Width SHould be Used with Dexter Over Under Kit # K71-384-00
- Q&A: Would Dexter 3,500 lb Axle Made in 1999 Use Same Hubs as Current