Will The Trimax Trailer Wheel Chock and Lock TMX72ZR Fit 12" Trailer Wheels?

Question

Question:

you mean tire size? new trailer I bought has 12 inch wheels or tires

asked by: Frank E

0

Expert Reply:

We do have the Trimax Trailer Wheel Chock and Lock (12" - 15" Wide Tires) # TMX72ZR listed a little odd, but hopefully the following will help clear things up. The # TMX72ZR will fit the following sizes:

4.8"-R12
195/75 R14
205/60 R15
205/70 R15
215/70 R15
225/75 R15 (snug fit)
235/75 R15

The Trimax Trailer Wheel Chock and Lock (12 - 16-1/2" Wide Tires) # TMX85FR will fit all the previous sizes, plus a few more, in case you didn't see what you have.

16.5 x 6.5-8
7.5"-R16
235/80 R16
33" x 12.5"-R15

So basically the width listed is referring to the diameter of the wheel. The largest section width the # TMX72ZR will fit is right around 9.5" (average for the 235/75 R15 tire size).

expert reply by: Lazer S

0

Answer 1

I'll go ahead and list out below all the tire sizes that are compatible with the Trimax Trailer Wheel Chock and Lock - 12" to 15" Wheels #TMX75FR: - 4.80-R12 - 195/75-R14 - 205/60-R15 - 205/70-R15 - 215/70-R15 - 225/75-R15 - 235/75-R15

view full answer...

Answer 2

There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…

view full answer...

Answer 3

Hey Sam, thanks for reaching out! The Ark Articulating Off-Road Coupler for 2" Receivers #AR44FR is a great way to add some versatility in where your trailer can be towed, but since everything can move around it does present some challenges when…

view full answer...

Answer 4

A standard trailer dolly like #RA20 is not directly compatible with the Lock N Roll hitch system. There is not a dolly designed to work with that system, however if you were to use a similar system with the ability to attach to a hitch ball, then a…

view full answer...

Answer 5

When it comes to installing The CargoSmart Anti-Rattle D-Ring Tie-Down Anchor - Bolt On - 1/2 inch x 3-1/4 inch - 3,666 pounds #3486509 into your aluminum trailer you can. Aluminum is a soft metal and therefore a standard HSS drill bit will be able…

view full answer...

Answer 6

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

view full answer...

Answer 7

The Trimax Trailer Wheel Chock and Lock - 12" - 15" Wide Tires can be ordered keyed alike as part #TMX72ZR but this only comes with 2 chocks and there isn't a way to order sets of these keyed alike. So you won't be able to get all…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will The Trimax Trailer Wheel Chock and Lock TMX72ZR Fit 12" Trailer Wheels?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching