Replacement Cap Kit for the HappiJac 4150 Jack System

Question

Question:

Does Replacement Cap Kit for HappiJac Manual Truck Camper Jacks - Qty 1 Item # LC183332 fit the 4150 jacks?

asked by: Shad K

0

Expert Reply:

Yes, the Replacement Cap Kit for HappiJac Manual Truck Camper Jacks # LC183332 will fit your HappiJac Model 4150 jacks. I verified this with the manufacturer.

expert reply by: Scott S

0

Answer 1

We have replacement legs for the HappiJack truck camper systems like the part #LC736515 which has 36-1/2 inches of lift and a 2,800 lb capacity as well as the #LC736514 which has 34-1/2 inches of lift and a 2,200 lb capacity but the legs themselves…

view full answer...

Answer 2

To get a hand crank compatible with the HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs #LC736514-4 you were looking at you will just need to order the Manual Crank #LC182436. This will allow you to raise and lower the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, the Replacement Jack for HappiJac Truck Camper Jack System part #LC736514 (Model 4220) will fit your HappiJac Truck Camper Jack System Model 4150. If you need a new gearbox/motor then we have that as well, the Replacement Motor and Gear Head…

view full answer...

Answer 6

The only replacements parts we currently offer are just the gears #LC182851, which you said most likely isn't the cause. It does sound like something is binding up inside of the gear housing so I would at least try to take apart what you can to…

view full answer...

Answer 7

Well that stinks to hear; I'm sorry someone was lousy enough to steal from you. And while we do have an option for you, the older wired remote is not available as a replacement part. So what you would need to do instead is replace the circuit…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Based on the Happijac setup you have the correct electric upgrade kit you'd need is the #LC733960-182524.

view full answer...

Answer 10

It sounds like you are wanting to know if your current 4150 motor will work with the Replacement Jack for HappiJac Truck Camper Jack Systems #LC736514 (4220). Yes, the 4150 drive motor that you have will work with the #LC736514.

view full answer...

Replacement Cap Kit for the HappiJac 4150 Jack System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching