Hitch for 2022 Toyota Sienna to Carry 1 Up Bike Rack for 1-1/4 inch Hitch

Question

Question:

I have a 2022 toyota sienna LE Hybrid. And i have a 1 up 1.25” bike rack. What type of trailer hitch should i buy for my bike rack

asked by: Pau

0

Expert Reply:

There are only 2 inch hitches available for your 2022 Toyota Sienna like the etrailer part # e56RR so you'd need to use a hitch adapter like 2 inch to 1-1/4 inch Adapter part # HT02 to go from the 2 inch size down to the correct size for your bike rack.

expert reply by: Jameson C

0

Answer 1

The only difference between the Curt Trailer Hitch Receiver #C22UR and our etrailer Trailer Hitch Receiver #e56RR is the powder coat finish. We selected Curt to manufacturer our receivers as they are made in the USA and have a great reputation for…

view full answer...

Answer 2

I recommend the etrailer Trailer Hitch Receiver #e56RR for your 2022 Toyota Sienna XSE. This is a custom fit Class III hitch with a 2" receiver. The hitch has a max gross trailer weight of 3,500 lbs and tongue weight of 350 lbs. It also…

view full answer...

Answer 3

Installation is pretty straightforward regarding the Curt trailer hitch that fits your 2021 Toyota Sienna, which is the Curt Trailer Hitch Receiver #C22UR. You only need to remove the underbody panel from the passenger side, remove the hole plugs…

view full answer...

Answer 4

Yes, there is trimming required for the installation of the etrailer Hitch Receiver #e56RR. The trimming involves part of the underside fascia panel. I went ahead and attached a photo of the trimming area and dimensions.

view full answer...

Answer 5

The only difference between our etrailer Trailer Hitch Receiver #e56RR and the Curt #C22UR is the finish. We have our receiver manufactured by Curt as we recognize the quality and strength they offer. Our receiver is finished in a matte black…

view full answer...

Answer 6

The hitch that I recommend for your 2022 Toyota Sienna is the etrailer Trailer Hitch Receiver #e56RR. This hitch is made in the USA, has a bolt-on, no-drill installation and a matte black finish that looks good when installed. This hitch will also…

view full answer...

Answer 7

Though the Curt hitch and the etrailer hitch are very similar I recommend going with the etrailer hitch #e56RR. The etrailer hitch has a matte black powder coating that will help keep scratches and scuffs less visible that you would receive from…

view full answer...

Answer 8

Yes, you can use a load range C tire instead of a load range B tire as long as the new tire and rim are the same size and have the same bolt pattern as the old tire and rim. In this case, the potential new tire you reference, Kenda 4.80-12 Bias…

view full answer...

Answer 9

Good question. Trailers that use dual tires on both sides of the same axle, so that a tandem axle trailer with two such axles has a total of 8 tires, will often have a lower per-tire rating for that dual-tire setup. In other words, the total capacity…

view full answer...

Answer 10

The 113/108 L is the load index which is normally translated to pounds capacity. For instance the 113 is 2,535 lbs maximum capacity and 108 is 2,205 lbs. For instance the Westlake ST205/75R14 Radial Trailer Tire - Load Range D #274-000012 has a…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Hitch for 2022 Toyota Sienna to Carry 1 Up Bike Rack for 1-1/4 inch Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching