Replacement Clamps For An Extang BlackMax/Classic Platinum Soft Tonneau Covers

Question

Question:

Do you have clamps available for the black max tonneau cover? Part # 2625-25, I would need 3 sets Thanks

asked by: Jerry F

0

Expert Reply:

Yes we do have exactly what you're looking for, for your Extang BlackMax or Classic Platinum tonneau cover.

The Replacement Clamps for Extang BlackMax or Classic Platinum Soft Tonneau Covers # EX2625-26 is the exact part you're looking for.

These 2 clamps are for your Extang BlackMax or Classic Platinum soft tonneau cover and will secure your tonneau cover rails to your truck bed's side rails.

expert reply by: Bryce D

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Replacement Clamps For An Extang BlackMax/Classic Platinum Soft Tonneau Covers

Product Page this Question was Asked From

Continue Researching