Replacement Gear Motor & Gear For Ventline Roof Vent V2119  

The Replacement Gear Motor with Pinion Gear #BVB0601-00 is the correct replacement for the Ventline Ventadome roof vent model V2119. It sounds like you also need the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents…

If the lift motor on your Ventline #V2119-601-00 runs when you try to operate it then it sounds like you need the Replacement Plastic Gear #BVD0121-00 which operates the lift arm. To replace the lift motor you need the Replacement Gear Motor with…

It sounds like you have the Ventline Ventadome Roof Vent w/ 12V Fan #V2119-601-00. This Ventline roof vent has a powered lift arm assembly. The correct arm assembly replacement that you would need would be the Replacement Operator, Knob and Screw…

The Replacement Gear Motor with Pinion Gear for Ventline Ventadome Trailer Roof Vent #BVB0601-00 or just the Replacement Plastic Gear for Ventline Ventadome Trailer Roof Vent - Dome Motor Gear #BVD0121-00 is what you need to lift the dome.

The only stand-alone replacement plastic gear for Ventline Ventadome Trailer vents that we offer is part #BVD0121-00. This part works with roof vent model V2119.

You'd need the screw part #VC0270-00 as it is not included with the #BVD0121-00.

I believe the part #BVD0121-00 is exactly what you would need. I went and measured one from our warehouse and it is 1-9/16 inches in diameter and 1/4 of an inch thick.

We have the perfect solution. You can use a Linxup GPS Tracking Device, part #300-AT3. Using the associated app you can track the trailer, see how much it has moved, set up a "fence" around the trailer so if it leaves that area you will be…

In regards to the Linxup GPS Tracking Device part #300-AT3, once you install the GPS device, you'll be ready to choose and set up the Linxup service plan that works for you. When you purchase a service plan, you can download the Linxup mobile app…

According to my contact in the engineering department at Ventline, the cause of what you have going on is a damaged operator. The operator is the linkage between the motor and the vent lid. Look at the photo I've provided. If the housing around…

The only replacement motor gear we have available for RV roof vents is the Ventline #BVD0121-00. This fits the Ventline Ventadome model V2119 and is the gear that transfers power from the motor to the operator for opening and closing the vent. If…

We carry two different replacement operator and knob assemblies for the Ventline trailer roof vents. The operator you referenced, #BV0115-04, will work with vent covers that have either a slot or a slotted bracket for the end of the operator arm to…