What Size Bolts Is The Replacement Wingnut for Thule Cargo Boxes TH04877 Designed To Work With?

Question

Question:

what size bolt fits this knob?

asked by: Michael J

0

Expert Reply:

The Replacement Wingnut # TH04877 you were looking at is designed to work with M6 Bolts. So as long as your Thule cargo box uses an M6 bolt this will work perfectly for you.

expert reply by: Samuel C

0

Answer 1

The threads inside Thule replacement knob #TH04877 are metal. I have included a picture where you can see a little bit of the inside part.

view full answer...

Answer 2

The replacement wing knob #TH04877 that you referenced fits a 6mm M6 bolt, such as carriage bolt part #TH915-0675-11 or u-bolt part #TH02943. According to my contact at Thule/SportRack this knob fits a variety of applications for both brands'…

view full answer...

Answer 3

The carriage bolts used for the Thule Summit cargo box are #TH10403, sold in quantities of 1. The knob is #TH04877, also sold in quantities of 1. If you need all of the bolts and knobs then you will need 8 of each.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

What Size Bolts Is The Replacement Wingnut for Thule Cargo Boxes TH04877 Designed To Work With?

Product Page this Question was Asked From

Continue Researching