Lippert Hydraulic Level Up Generation II Jacks For Towable RV Campers

Question

Question:

Do you carry the Lippert Level Up jacks that have the holes on top of the jack and not the side?

asked by: Mike A

1

Helpful Expert Reply:

With your jacks having the holes on top of the jack going vertically into the jack those are the Generation II jacks from Lippert. Here is a list of all the different Generation II Level Up Jacks available.

Black 8K 18-1/2" Replacement Hydraulic Jack Assembly # LC73ED
Black 8K 21-1/16" Replacement Hydraulic Jack Assembly # LC43ED
Silver 8K 21-1/16" Replacement Hydraulic Jack Assembly # LC63ED
14K Lead Leg Hydraulic Jack Assembly # LC83ED
14K Follow Leg Hydraulic Jack Assembly # LC23ED

expert reply by: Bud M

1

Answer 1

Here is a list of all the Lippert Level Up replacement jacks we offer. Currently this is the only way Lippert offers their jacks and they do not offer a rebuild kit for these. Replacement Lippert Level Up Hydraulic Jack - Silver - 8,000 lbs -…

view full answer...

Answer 2

For absolute best results you'd install three of the MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension #MR99ZR but some people will use just two on a tandem setup and it will work great. If you check out the install…

view full answer...

Answer 3

For your 2018 Fuzion 429 triple axle Toy Hauler the MORryde Suspension Upgrade Kit for Triple Axle Trailers #MR86ZR would be what you'd want. This comes with wet bolts like you are wanting as well as the matching heavy duty shackle straps…

view full answer...

Answer 4

Since your 2016 Forest River Vengeance Model 39R12 has 33" axle spacing and triple axles the #MR59ZR will likely work just fine for you, but you will need to take a few measurements first. The first measurement is from the bolt hole in the…

view full answer...

Answer 5

It is recommended to install 3 of the MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension #MR99ZR since you have 3 axles. I have heard of people installing just one or two if they have the majority of the weight on those axles,…

view full answer...

Answer 6

The MORyde #MR39ZR does indeed include 4 equalizers as shown in the photos on our product description page, which I've linked for you. The listing is in error, and I'll have it corrected. I'll also link to a product…

view full answer...

Answer 7

The equalizers on your triple axle setup will not be identical and there is nothing to worry about with your hanger spacing. However, since they appear to be worn it may be a good idea to go ahead and upgrade them. It looks like the Dexter E-Z Flex…

view full answer...

Answer 8

With your springs being 26" long while loaded you most likely have 25-1/4" Springs #e34SR on your 2020 Grand Design Reflection 5th wheel. These particular springs are rated for 6,000lb axles. With your Grand Design having a GVWR…

view full answer...

Answer 9

For your 2007 Damon Daybreak 3276 that has roof ducts for an AC unit to install the Atwood Air Command Rooftop RV Air Conditioner w/ Heat Pump #AT15028-22 will work great and will install directly. The bottom of this unit is setup for attaching to…

view full answer...

Answer 10

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

view full answer...

Answer 11

If the Lippert Ground Control part #LC675817 display screen is displaying an error that says "Return Leveler for Service" then you should be able to just clear the code. There is not any specific information on why this error code…

view full answer...

Answer 12

Thank you for the picture of the module your Lippert Ground Control kit has as I can tell from it that you have a 4 point kit. So for a replacement control module you'd want the part #LC304136. The "points" refer to the…

view full answer...

Lippert Hydraulic Level Up Generation II Jacks For Towable RV Campers

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching