Can You Use The 1K Spring Bars With The BlueOx TracPro 1.3K System WDS?

Question

Question:

Are the 1000 lb spring bars comp[atible with the BLU27FR 1300 lb system?

asked by: Alan B

1

Helpful Expert Reply:

Yes, you can use the Replacement 1,000-lb Spring Bars for Blue Ox TrackPro Weight Distribution System # BLU52FR with the Blue Ox TrackPro Weight Distribution w/ Sway Control # BLU27FR.

expert reply by: Bryce D

1

Answer 1

As long as the Spring Bars #BLU52FR lay flat on the L-Brackets #BLU72QR for your Blue Ox Track Pro weight distribution you are okay to use the brackets pitched slightly forward. The only issue would be if the spring bar is only touching the edge…

view full answer...

Answer 2

Weight distribution hitches like the Blue Ox TrackPro all typically have a tongue weight range that they're designed to handle and going too far above or below that range with hinder the performance of the hitch. In the 900lb tongue weight…

view full answer...

Answer 3

The Blue Ox Track Pro 7 Hole Shank #BLU28FR can be used with systems with a tongue weight up to 1,300 pounds. Upgrading the bars to a capacity more suitable for your needs would require the Replacement 1,000 pound Track Pro Bars #BLU52FR. These are…

view full answer...

Answer 4

Weight Distribution hitches are classified by the maximum tongue weight they'll handle, so the logical first step in choosing the right system for your needs would be to identify the tongue weight of your trailer as it sits when it's…

view full answer...

Answer 5

The most accurate way to spec out a weight distribution system is to positively determine the tongue weight of the RV when it's fully loaded up as you'd typically have it when towing. To that figure, you'd add the weight of anything…

view full answer...

Answer 6

Yes, you should swap the weight distribution bars to the 1,000-lb Spring Bars for Blue Ox TrackPro #BLU52FR. These have a tongue weight capacity of 800-1000lbs. It is important to use the correct bars with the TrackPro since the sway control and…

view full answer...

Answer 7

I would be happy to help you determine the correct weight distribution hitch for towing your travel trailer with your 2018 Ram 1500, but you will need to confirm the total tongue weight of your setup to make sure you select the correct system. Total…

view full answer...

Answer 8

Per the instructions(linked below) for the Blue Ox TrackPro Weight Distribution #BLU27FR you should have at least one open hole on your L-Brackets #BLU42QR. It sounds like your hitch head may be pitched to far down or you have an underslung coupler.…

view full answer...

Answer 9

Since your tongue weight is 955 lbs the spring bar replacements you'd want for your Blue Ox TrackPro is the part #BLU52FR. If your loaded tongue weight is going to be over 1,000 lbs though you'd want to go with the part #BLU32FR instead as…

view full answer...

Answer 10

Yes, you can easily upgrade the capacity of the 8K Blue Ox TrackPro Weight Distribution System part #BLU47FR to 10K using the Spring Bars for Blue Ox TrackPro Weight Distribution System part #BLU52FR.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Your current Blue Ox TrackPro part #BLU36FR as it sits does not have the correct rating for the larger trailer you are going to but there is a pretty easy solution. You can just swap the spring bars out with the part #BLU52FR and you'd have a…

view full answer...

Can You Use The 1K Spring Bars With The BlueOx TracPro 1.3K System WDS?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching