Replacement Idler Hub Needed for 3500 Pound Axle with 6 on 5-1/2 Bolt Pattern
Question:
I am looking for a hub w/o brakes to replace a damaged hub. The damaged hub is stamped with “QTP” and “84000”. I’ve not been able to find anything based on those markings, but the TRU77FR spindle has the same bearing dimensions as the hub I am replacing. I need a 6 bolt 5 1/2” pattern hub.
asked by: David F
Expert Reply:
If you are positive that your bearings have the same L68149 (1.378" inner diameter) inner bearing and the L44649 (1.063" inner diameter) outer bearing as the #84 EZ Lube Spindle # TRU77FR, we have what you need! You have a 3,500 pound capacity axle with idler hubs (thanks for the photos!)
For the hubs, I recommend the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K. This comes with the same 6 on 5-1/2 pattern that you need. This is for a non-braking axle. I went ahead and attached a demo video that highlights all the parts included.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Trailer Spindles
- EZ Lube Spindle
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Trailer Hitch
- Q&A: Replacement 1998 PJ Utility Trailer Hub with QRG 3G and 84000 Stamped Into Hub
- Shop: Trailer Wiring
- Video: Curt Class III Trailer Hitch Installation - 2024 Mazda CX-50
- Search Results: a57ccb
- Shop: 7-Pole Blade to 5-Pole Flat Connector Wired Trailer Adapter - Coiled Cable - 94-1/2" Long
- Search Results: 23~112~113
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Search Results: 9519360
- Shop: Demco Tabless Base Plate Kit - Removable Arms
- Shop: Suspension Enhancement
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Brake Controller
- Search Results: al25980ez
- Search Results: 57596
- Shop: Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle
- Video: Best 2022 Kia Telluride Trailer Wiring Options
- Search Results: hba~10
- Search Results: tekonsha 90160
- Shop: Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Shop: Base Plate for Tow Bar
- Shop: Side Window Vents
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Trailer Wiring Diagrams
- Video: Review of Optronics Trailer Lights - Red LED Clearance Light or Side Marker Light - OPT53FR
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-1K Review
- Video: Review of HE Parmer Trailer Fenders - No Step - HP69VR
- Q&A: Are Load Resistors Required When Installing LED Lights on a Trailer
- Q&A: What Makes a Wheel Rated for Use on a Boat Trailer