24" x 4" Replacement Step Pad for Aries Nerf Bars

Question

Question:

I need replacement Aries step pads that are 24” long by 4” wide with 5 pins, what do you recommend?

asked by: Wayne

0

Expert Reply:

The Replacement Step Pad for Aries 4" Wide Oval Nerf Bars # AA2090161 is the closest we have to the 24" x 4" step pad with 5 pins.

The Replacement Step Pad for Aries 4" Wide Oval Nerf Bars # AA2090161 are 23-5/8" x 4" with 4 pegs and a center pin used for aligning the step. I have included a picture of this pad so you can take a look at all of the measurements.

If this does not work for your nerf bars, please let me know the model number of your nerf bars or submit some pictures with measurements of your step pads and pegs and I would be happy to look further into this for you.

expert reply by: Scott S

0

Aries Step Pad for 4 inch Oval Nerf Bars Diagram
(click to enlarge)

Answer 1

Actually, if you look closely the #AA2090161 has 4 pegs and a center pin used to align the step. Aries tells me that the #AA2090161 is indeed the proper replacement step for their 4 inch wide oval step bars. I've provided a photo showing the…

view full answer...

Answer 2

I spoke with Aries and they informed me that the Replacement Step Pad for Aries 4" Wide Oval Nerf Bars part #AA2090161 is 23-5/8" long x 4" wide and the pins are spaced 4-3/4" apart from the first to second and third to forth. The…

view full answer...

Answer 3

For the Replacement Pads you are seeking, it sounds like you have the 4-inch Wide Oval steps. If that is the case then the replacement is #AA2090161.

view full answer...

Answer 4

We do indeed offer replacement step pads. There are two possible replacement pads for the Aries Automotive #AAS224046-2 step pads. You an look on the bottom of the pad that came loose and you'll immediately be able to determine which one you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

24" x 4" Replacement Step Pad for Aries Nerf Bars

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching