Replacement Step Pad for Aries Nerf Step

Question

Question:

I have an older 2012 Dodge Ram that has Aries steps. I need to replace one of the plastic pads and I cant seem to find the right one. They have 5 holes with the outer holes spaced about 4 3/4 inches apart and the center hole is about 6 1/4 - 6 1/2 from the next closest holes. Which replacement would you recommend? Thanks

asked by: John

0

Expert Reply:

For the Replacement Pads you are seeking, it sounds like you have the 4-inch Wide Oval steps. If that is the case then the replacement is # AA2090161.

expert reply by: Jason S

0

Answer 1

Actually, if you look closely the #AA2090161 has 4 pegs and a center pin used to align the step. Aries tells me that the #AA2090161 is indeed the proper replacement step for their 4 inch wide oval step bars. I've provided a photo showing the…

view full answer...

Answer 2

The Replacement Step Pad for Aries 4" Wide Oval Nerf Bars #AA2090161 is the closest we have to the 24" x 4" step pad with 5 pins. The Replacement Step Pad for Aries 4" Wide Oval Nerf Bars #AA2090161 are 23-5/8" x 4" with…

view full answer...

Answer 3

The Replacement Step Pad for Aries 4" Wide Oval Nerf Bars #AA2090133 are longer than the ones that you currently have. The overall length is 23-5/8" long. The center 2 pegs are 12-5/8" apart on center and the outer pegs are another…

view full answer...

Answer 4

I spoke with Aries and they informed me that the Replacement Step Pad for Aries 4" Wide Oval Nerf Bars part #AA2090161 is 23-5/8" long x 4" wide and the pins are spaced 4-3/4" apart from the first to second and third to forth. The…

view full answer...

Answer 5

I contacted the manufacturer about the correct replacement pads for your Aries Oval Nerf Bars - 4" Wide #AAS225041. They said that the correct pads would be one of two options. Either the Replacement Step Pad for Aries 4" Wide Oval Nerf…

view full answer...

Answer 6

I do see the back of the Replacement Step Pad #AA2090161 has 8 ribs while the back of the Replacement Step Pad #AA2090133 has 10 ribs.

view full answer...

Answer 7

While we have options for you, the pads with 4 holes you asked about, the Replacement Step Pad for Aries 4" Wide Oval Nerf Bars #AA2090133 will not work as replacements. The option that may work is the Replacement Step Pad for Aries 3" Wide…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Replacement Step Pad for Aries Nerf Step

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching