Master Key for Rhino Rack Lock Cylinder #093

Question

Question:

Will the master key work on locking cylinder #093 on the cover plates for the 2500 series euro style rhino rack?

asked by: James A

0

Expert Reply:

The Rhino-Rack Masterkey Lock Barrels - Keyed Alike - Qty 2 item # RRRK093-2 will work on your 2500 series Rhino Rack with locking cylinder # 093.

expert reply by: Jerred H

0

Answer 1

We do have a way for you to get a replacement key 093 for your Rhino-Rack roof rack, though Rhino-Rack does not make just the keys by themselves available, unfortunately. So the only way to get a replacement 093 key is with the lock set that includes…

view full answer...

Answer 2

We do have replacement keys for Rhino-Rack, but they are not stand-alone keys. The come with the lock cores. If you do not need the lock cores, I recommend going with the two lock core option. Two is the least amount of lock cores you can get in a…

view full answer...

Answer 3

I spoke with Rhino Rack about the Rhino-Rack Road Warrior Rooftop Bike Carrier part #RBC036 and they stated there is a tab on the backside of the skewer that will need to be depressed with the key inside the lock and it being in the unlocked…

view full answer...

Answer 4

We do offer the Rhino-Rack Masterkey Lock Barrels in a set of 2 #RRRK005-2, or 4 #RRRK005-4. All these locks and keys are coded to the Key 005. You will be able to purchase any combination of the locks above to get the amount of locks cylinders you…

view full answer...

Answer 5

I spoke with my contact at Rhino Rack and the replacement part number you need is part #RBCA022 which is the replacement skewer for the Rhino Rack Road Warrior #RRRBC036.

view full answer...

Answer 6

The hitches available for your Prius are Class I, which have a low tongue weight capacity (maximum amount of weight that can safely be suspended from the hitch) of 200 lbs. Because of this, the bike rack and the hitch manufacturers both agree that…

view full answer...

Answer 7

The Rhino Rack Road Warrior part #RBC036 is a really great choice that fits the factory crossbars of your 2018 Honda Odyssey, is priced great, and comes with locks for the bikes and the rack. You might have to stagger the direction of the bikes as…

view full answer...

Answer 8

Yes, the front T-Bolts that come with the Rhino-Rack Road Warrior Rooftop Bike Carrier #RBC036 will fit in the channels of the Yakima RailBar Crossbars #Y00448-0449 that you'll be installing on your 2019 Subaru Impreza.

view full answer...

Answer 9

The crossbar spread will vary depending on the accessory you want to put on the roof rack. The Yakima FrontLoader Wheel Mount Bike Carrier, part #Y02103 will work with a crossbar spread between 16 and 48 inches, so you can see it will work with most…

view full answer...

Answer 10

Try spraying WD40 into the lock core using the straw to direct it into it. That should free up any stuck tumblers.

view full answer...

Answer 11

To turn the hitch pin of the Rhino Rack T-Load part #RTL002 into a locking hitch pin what you'd need is the part #RRRBCA025 and you'd be set.

view full answer...

Answer 12

The Rhino-Rack #RRRK083-4 replacement MasterKey lock barrels include 2 replacement 083 keys that would be the proper replacement keys for your existing 083 locks.

view full answer...

Master Key for Rhino Rack Lock Cylinder #093

Products Referenced in This Question

Continue Researching